Bedienungsanleitung Zelmer 40Z012 (Seite 27 von 30) (Englisch, Polnisch)

538916

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

29GW40-006_v01

Outline (Fig. A)

Grill base

Grease drip tray

Heating plate

Grids

Grilling plate

Shield

Thermostat with supplying cord

Pilot lamp

Heat-resistant handles

Specications

The appliance is built in I class isolation, grounding

necessary.

Technical parameters are included at the name plate.

Grill meets the requirements of appropriate standards.

The appliance meets the requirements of the following

directives:

Low Voltage Device (LVD) – 2006/95/EC. –

Electro- Magnetic Compatibility (EMC) – 2004/108/EC. –

The product is marked with CE symbol on the name plate.

Assembling (Fig. B)

ATTENTION: Remove all stickers before rst usage

and clean the appliance thoroughly (see: „Cleaning

and maintenance”).

Make sure hat the heating plate socket and thermostat

●

plug are dry.

Install the grease drip tray (2) at the base (1). Always put

aluminium foil inside the grease drip tray to make cleaning

easier.

Assemble the heating plate (3) at the base.

Apply a small amount of oil on the heating plate before

usage and distribute it with paper towel.

Assemble shield (6) if it’s necessary. In order to do it,

insert the protrusions of heating plate in the shield inlets.

ATTENTION: It is recommended to use shield when

grilling products containing fat.

Insert the thermostat with supplying cord (7) in the

appliance socket. Make sure that the thermostat knob is in

“OFF” position.

Connect the supplying cord to the mains supply outlet.

Start-up

Set the thermostat

●

(7) for desired temperature

(”I” to “V”).

“I” = the lowest temperature.

“V” = the highest temperature.

During warming up the pilot light (8) glows. When the

appliance reaches the set temperature, the light goes off and

the heater shall switch off. The grill heat up from time to time,

in order to keep the set temperature.

During rst usage, the preserving materials shall be burnt

which can cause short emission of unpleasant smell at the

initial stage of grilling.

ATTENTION: It is not allowed to move the hot appliance

during operation! At rst switch off and wait until it

cools down. Move with heat-resistant handles only.

Operation guidelines

It is recommended to wipe the surface with edible oil

●

before grilling products in order to improve the non-

sticking properties.

The grids

●

(4) are perfect for preparing meat, sh and

poultry. The fat and juice ows though the grids spaces

down to the grease drip tray which provides preparation

of healthy and low-fat meals.

The grilling plate

●

(5) is perfect for preparing eggs, ham,

tomatoes, onion, etc. It is also excellent for keeping the

dishes warm.

The 3–4 level is recommended In order to obtain uniform

●

grilling.

Heat the grids before putting the products on.

●

When preparing tender dishes (i.e. sh) after applying

●

spices you can wrap it with aluminium foil.

Soft pieces of meat are the best for grilling.

●

You can marinate meat in advance, to make it more

●

tender.

Use special tongs or spatula for turning products on grill,

●

it is not allowed to use pointer forks.

Do not turn the grilled products to often. In case they get

●

brown on both sides, nish grilling at lower temperature.

Thanks to it the products shall not get dry and they shall

be uniformly grilled.

In case the products are not instantly consumed, you can

●

keep them warm with 1 level setting.

It is not allowed to cut the products on the grill, in order to

prevent the damages of non- stick layer.

After operation

Set the thermostat in “OFF” position in order to switch off

●

the appliance.

Always disconnect form mains after usage.

●

Let the

appliance cool down before disassembling and

cleaning.

Cleaning and maintenance

Wash and wipe thoroughly all parts before storage.

●

Make sure that the plug and heating plate are dry

●

before connecting the thermostat to the heating plate. If

necessary, wipe thoroughly with dry cloth and leave for

drying for a while.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zelmer 40Z012 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info