540070

Zelmer 478 Seite 79

79
Zoom out
Zoom in
Vorherige Seite
1/86
Nächste Seite
83
Construction of the appliance (Fig. A)
1
Motor
a
power on/off button
b
gear 1 – gear 2 / turbo button
c
indicator light
d
pulse button (does not apply in case of juice extractor)
e
skimmer
f
sucker
g
power supplying cord
JUICE EXTRACTOR SET
2
Juice container
h
spout
i
cover
3
Body of the juice collector
4
Strainer
5
Lid
6
Clamps
7
Pusher
8
Pulp container
MIXING CUP SET
9
Mixing cup
10
Lid
11
Feeder
COFFEE GRINDER SET
12
Coffee grinder
13
Container
14
Lid
Characteristics of the juice extractor
The juice extractor is an electrical appliance for fast fruit and
vegetable juice centrifuging with automatic separation of
pulp. The raw material is rst pulped and next the juice is
centrifuged from the pulp. A simple and easy operation of the
appliance enhance its utility advantages. An electronic speed
stabilizer ensures a constant rotation speed irrespectively of
loading, which guarantees obtaining of juice even consistency.
The juice extractor is equipped with 2 centrifuging speeds
(for hard and soft fruit) which were chosen to obtain the
optimal quality parameters for squeezed juices. Keeping the
maximal content of fruit pulp and bre containing vitamins,
pectin, enzymes and minerals in the juice results in its lower
clarity. This is an intended effect since the Producer of the
juice extractor decided that it is more important to keep the
highest possible nutritious, health and dietetic values of the
obtained fruit than its clarity. The juice extractor is additionally
equipped with lter self-cleaning function. After pressing the
turbo button, the engine works for about 3 seconds with high
rotation. High rotation helps to clean the lter in the event of
vibrations resulting from excessive pulp accumulation. The
turbo function may be used in 10-second intervals only. The
juice extractor may work for 15 minutes without any break.
The quantity of juice obtained, e.g. from 1 kg of a raw material
depends on its freshness as well as on lter cleanliness and
the state of the pulping blade. The parts in contact with the
processed raw materials are made of materials permitted for
contact with food.
Juice extractor safety operation instructions
Do not use the juice extractor if the spinning strainer is
●
damaged.
Make sure that the lid is clamped securely in place before
●
motor is turned on.
Do not unfasten clamps when the juice extractor is in
●
operation and the strainer is spinning because the safety
system will cause the appliance to stop.
Use the pusher only to push food into the feeder
●
opening.
Do not overload the appliance with excessive amounts of
●
food or too intense pushing (with the pusher).
Immediately turn off the juice extractor if you notice
●
strong vibrations or the rotation speed is reduced. Clear
the strainer and its cover.
Turn the motor off and unplug the appliance if food is
●
blocked in the feeder opening or on the grinding blades.
Remove the cause of blocking.
Use hard bristle brush for cleaning the strainer with sharp
●
grinding blade.
Do not use the juice extractor without pulp collector.
●
Do not overload the appliance with extensive amount
●
of product or do not push it to strong (with a pusher),
because a sudden increase of juice amount in the bowl
spout can cause the juice overow out of the lid or into
pulp collector.
Preparation of the juice extractor for
operation (disassembling) (Fig. C)
Before using the juice extractor for the rst time, disassemble
it and wash parts in contact with the processed product.
Place the juice extractor near the socket on the rm,
●
clean and dry surface.
1
Pull down the clamps (6) so that the tracks moved out of
grooves of the lid (5).
2
Take the pusher (7) and the lid (5) out.
3
Then remove the juice collector (2) including the body
(3) and the lter (4). To this end, turn the body (3) right
(clockwise) to the limit and raise the body with the juice
collector and the lter.
4
Finally, disassemble the juice collector (2) from the
body (3).
Wash the disassembled parts (except the motor unit)
●
carefully in hot water and wash-up liquid. You can also
clean them in a dishwasher in max temp. 60°C (except
for the strainer and the motor unit). After drying them
carefully, start assembling the clean parts.
… 79 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Zelmer 478 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info