Bedienungsanleitung Zelmer 486 (Seite 47 von 50) (Englisch, Polnisch)

540088

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

486-005_v01

Part names (Fig. A)

Juice extractor motor

I-0-II switch

TURBO button

skimmer

vacuum cup

supply cord

Bowl

juice spout

outer n

inner n

Bowl insert

notch

Filter

Lid

Locking bar

Bowl for small fruits

Pusher

Juice collector

Foam separator

Lid of collector

Pulp collector

Brush

Preparations for operation

(disassembling) (Fig. B)

Disassemble the juice extractor before rst

usage and clean the parts in contact with

processed product.

Place the juice extractor near the socket on the rm,

clean and dry surface.

Pull down the locking bar (6) so that the tracks moved

out of grooves of the lid (5) from position 1 to position 2.

Take the pusher (8) out and remove the bowl (7) and

lid (5).

Then remove the bowl (2) including the insert (3) and

lter (4).

Then, disassemble the insert (3) from the bowl (2).

Wash the disassembled parts (apart from the

motor) carefully in hot water and wash-up

liquid. You can clean them in dishwasher in

max temp. 60ºC (apart from the motor and

lter). After drying carefully start assembling

the clean parts.

Preparations for operation

(assembling) (Fig. C)

Align the bowl (2) to the motor (1), so that the juice spout

(f) was placed exactly in the casing (1) groove and 4 buckles

from the upper part of the motor (1) were placed inside the

4 grooves in the bottom of the bowl (2).

Insert the bowl insert (3) to the bowl (2) so that the notch

(i) in the bowl insert (3) is located in the inner n (h) of the

bowl (2).

Put the lter (4) inside and check if it is well mounted and

rotates easily.

Install the lid (5) so that the outer n (g) of the bowl (2) is

in the notch of the lid (5).

Pay attention to assemble the parts correctly. The outer

n (g) of the bowl (2) should be in one line with the notch in

the lid (5).

Pull the locking bar (6) up, so that the rolls moved into

grooves of the lid (5) from position 2 to position 1 (you will

hear a characteristic clicking sound).

Each time insert a bowl for small fruit (7) on the feeder

opening of the cover (5).

Put the pusher (8) into the chute so that the V-shaped

hole was put on the knife inside the chute.

Put the pulp collector (12) under the lid (5) in the following

way: lean the collector and place it under the insert (3) and

lid (5), then push it towards the motor (1).

Put the juice collector (9) so that the juice spout (f) was

inside the collector (9).

Start-up and operation (Fig. D)

Check if the switch is turned to

●

„0” position.

Plug the juice extractor in and start it up with the switch

(a) setting as necessary gear 1 (position I – low rotation) or

gear 2 (position II – high rotation).

Such exemplar table including exact

information on selection of appropriate gear for

particular fruit and vegetables is on page 48.

Put some fruit or vegetables into chute and press them

slightly with the pusher.

You mustn’t push the products with your

ngers or other objects.

In case of the necessity (In case of excessive accumulation of

the pulp on the lter, which causes juice extractor vibrations)

you can use TURBO button (b). The engine operates in such

case on maximal rotation for approximately 2 seconds. After

this time, the TURBO function switches off automatically,

and the engine returns to previous rotation.

Repeated usage of TURBO function can take

place after min. 10 seconds.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zelmer 486 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info