Bedienungsanleitung Zelmer 491 Symbio (Seite 51 von 54) (Englisch, Polnisch)

538860

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

55491-007_v01

inside the food processor container in one position only, so

that the protrusion of the permanent guard is locked inside

the handle of the food processor container.

Insert the lid of the food processor into the fasteners of

the container (take care that the lid is fastened with all the

fasteners).

Lock the lid.

Insert the blender drive (assembling of the drive is

possible only when the container lid is closed). Then lock it.

Set the desired gear using the speed control knob.

Insert processed products into the lid chute.

Hold the pusher to the chute, so that it does not press

the product before start – up of the appliance (push the next

portions of products when the blender drive is in operation /

the disc is rotating).

Connect the plug into the mains supply outlet. Then start –

up the appliance pressing the switch (2) of the blender drive.

After nishing operating the food processor (Fig. H)

Release the button (2) (or TURBO in case of using this

gear).

Remove the plug of the supply cord from the mains

supply outlet.

Unlock and remove the blender drive (after the appliance

stops completely).

Remove the pusher from the lid chute (in order to open

the lid it is necessary at rst to remove/lift the pusher out of

the chute).

Unlock and open the lid.

Remove the permanent guard.

Remove the disc.

Unlock the container.

Remove the container from the base.

Empty the container removing the products.

Operating instructions

Chipping and puree disc

During operation with chipping and puree disc it is

●

recommended to apply the blender drive speed 15 or

TURBO.

Insert the processed product into the feed chute, hold the

●

pusher (do not press), switch on the blender drive. When

the appliance is in operation press the pusher with a bit

of power.

When the container is lled up to MAX level, stop the

●

operation, empty it and collect the scrap accumulated on

the disc.

Slicing disc

During operation with slicing disc it is recommended to

●

apply the blender drive speed 15 or TURBO.

It is recommended to insert the products onto the feed

●

chute in vertical position so that they ll in complete

space of the chute.

Insert the processed product into the feed chute, hold the

●

pusher (do not press), switch on the blender drive. When

the appliance is in operation press the pusher with a bit

of power.

When the container is lled up to MAX level, stop the

●

operation, empty it and collect the scrap accumulated on

the disc.

OPERATION WITH ICE CRUSHER

The appliance characteristics

Zelmer hand blender is equipped with ice crusher which is

used for crushing ice and i.e. frozen fruits.

You can use the crusher only with the container

and lid of mini food processor!

Application of the accessories

Double-sided disc – is used for crushing, grinding ice and

frozen products. The disc is round, the blades are double-

sided. One side, which we recognize by the applied plastic

fteen- pointed star, g. 15a is used for rst level grinding

„I” (smaller particles of grinded product), the other side is

used for second level grinding „II” (bigger particles of grinded

product) and it is marked with seven-pointed star g 15b.

Spindle – is used for xing the disc.

Preparation of the ice-crusher

Before assembling and disassembling blender

motor drive On the ice crusher, make sure if

the supply cord plug is disconnected from the

mains supply outlet.

Wash the parts in contact with processed product before

rst usage.

Operate the blender so, that the closed/open markings

located on the appliance are well visible.

Operation with ice crusher (Fig. I)

Place the container of the mini food processor on rm,

at and dry surface.

Place the disc for ice on the spindle (double – sided disc),

so that the blades provided for operation are on the top.

Place the disc with the spindle inside the mini food

processor container so that the pivot protruding from the

container is inserted into the spindle orice.

Insert the ice crusher container on the fasteners of the

mini food processor. Then lock the crusher container, turning

it until you can feel it is blocked.

Place the processed products inside the container not

exceeding MAX level.

When you ll up the crusher container (14) with

appropriate amount of processed product (do not

exceed MAX level) center the spindle (16) (put in the

middle) to enable its proper coupling with the mini food

processor lid (10).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zelmer 491 Symbio Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info