Bedienungsanleitung Zelmer 491 (Seite 48 von 54) (Englisch, Polnisch)

538858

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

52 491-006_v01

Blenders are manufactured in II insulation class, they do not

require grounding .

ZELMER blenders comply with all current norms.

The appliance complies with current directives:

Low Voltage Directive (LVD) – 2006/95/EC. –

Electro-magnetic compatibility (EMC) – 2004/108/EC. –

The appliance is marked with CE symbol on its data plate.

Appliance specications (Fig. B)

basic blender accessories

additional equipment, which you can buy in shops.

Starting and setting the required speed

With the proper blade installed, plug the power cord into

the power supply outlet and get the appliance started

by pushing button (2). The blades can be smoothly set to

rotate at different speeds, which is easily set by turning the

speed selector in the range from 1–15. The highest rotation

is obtained by pushing the button “turbo”, no matter which

rotation is set on the speed selector.

The appliance is in operation only when the

switch (2) or „turbo” is pressed. Releasing

of any switch shall cause the blender drive is

instantly off.

Preparing the blender to use

USING PLASTIC SHAFT (Fig. C)

ZELMER hand blender with the plastic shaft can be used for

home cooking, preparing foodstuffs for children and drinks.

It is especially recommended for pureeing cooked and raw

vegetables, soft fruit (with no stones), mixing up different

beverages or preparing dips, sauces, soups or other soft-

textured foods.

Before assembling on and removing the

attachment, make sure, that the plug of the

supplying cord is disconnected from the mains

supply outlet.

Fill up the beaker, no more than the MAX level.

Attach plastic shaft to drive shaft , align them in the

position according to the indicators on the cover of the drive

shaft and the coupling. Then twist the drive shaft clockwise

(the direction is shown by the arrow) until you hear that it has

clicked (the indicator on the coupling should be in a closed

position.

Plug the power cord to the power supply socket.

Plunge the coupling in the products to be mixed.

Then start – up the appliance pressing the (2) switch and

set the required gear as necessary.

Appliance description (Fig. A)

Drive

Button switch on/switch off

“turbo” button

Speed selector

MIXING ATTACHMENT SET

Plastic shaft

6. Beaker for mixing with scale and hermetic lid

WHISK SET

Whisk gear

Whisk

MINI FOOD PROCESSOR SET

Mini food processor cover with transmission

Mini food processor blade

Cover

Mini food processor container

ICE CRUSHER SET

The ice crusher container

Double- sided disc of ice crusher for rst level

granulation I (smaller size

) and second level

granulation “II” (bigger size

)

Spindle

FOOD PROCESSOR SET

Food processor lid

Pusher

Base of the food processor

Food processor compartment

Permanent guard

Disc driver

Double sided disc for thick and thin slices

Double-sided disc for chipping and purée

Technical data

Technical parameters are quoted at product nameplate.

Drive shaft maximum working time:

with a plastic shaft 3 min. –

with whisk attachment 3 min. –

with the mini food processor 2 min. –

with food processor 2 min. –

with ice crusher 2 min. –

Idle time before reusing (min.) 20 min.

Appliance noise with the (L

blending attachment 89 dB/A –

beaters 70 dB/A –

mini food processor 80 dB/A –

food processor 87 dB/A –

ice crusher 74 dB/ – A

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zelmer 491 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info