Bedienungsanleitung Zelmer 880 (Seite 79 von 86) (Englisch)

540073

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

Preparation for operation, start-up and

operation

Wash the parts that have contact with the processed

●

food before initial use.

Place the motor near the power outlet, on a hard, clean

●

and dry surface.

Unwind a sufcient length of the cord. The remaining

●

cord can be stored in the housing. Put the remaining

cord in the housing through the opening in the back of

the housing.

Choose the appropriate equipment depending on the

●

selected type of operation.

OPERATING THE FOOD PROCESSOR (Fig. C)

Place the motor of the food processor on a hard, at, and

dry surface.

Place the work bowl on the motor so that the triangu-

lar ange on the bottom of the container ts the tri-angular

protrusion of the motor.

OPERATING THE SLICING DISC (Fig. D)

Take off the blade casing

Put the white food processor blade into the container

Put the ingredients into the container.

Put the lid on. Place the lid’s hook in the container’s

ange opening and lower the lid.

Press the lid in the marked spot until you hear a click.

The lid’s protrusion should be placed in the opening of the

housing.

Plug in the appliance.

●

Turn the control head and set the appropriate operation

speed (see table at the end of this instruction manual).

OPERATING THE GRATERS (Fig. F)

Install the selected slicing disc on the disc stem. Put the

slicing disc on the tang, place the hooks under the edge of

the disc stem and push until the hooks snap shut.

Holding the middle tang, put the disc stem with the slicing

disc in the container.

Put the lid on. Place the lid’s hook in the container’s

ange opening and lower the lid.

Press the lid in the marked spot until you hear a click.

The lid’s protrusion should be placed in the opening of the

housing.

Plug in the appliance.

Turn the control head and set the appropriate operation

speed (see table at the end of this instruction manual).

Type 878 – OPERATING THE MIXING CONTAINER

(Fig. G)

Place the container on the motor so that the triangular

ange on the bottom of the container ts the triangular

protrusion of the motor.

Put the mixing blade (grey) into the container.

Put the ingredients into the container.

Put the lid. Place the lid’s hook in the opening situated on

the container’s handle and lower the lid.

Press the lid in the marked spot until you hear a click.

The lid’s protrusion should be placed in the opening of the

housing.

Plug in the appliance.

●

Turn the control head and set the appropriate operation

speed (see table at the end of this instruction manual).

During operation the food pusher should be placed in

the feed tube opening. It prevents food from spattering

and splashing.

Operation tips

The food processor grinds ingredients very fast. Turn on

●

the appliance only for a short period of time. This way the

ingredients will not be excessively grinded. Do not grind

large pieces using the food processor blade. Cut the

ingredients to approximately 3 cm cubes before putting

them into the container.

Do not allow the food processor to operate too long while

●

grinding cheese, butter, margarine. Such products may

heat and melt.

If the ingredients stick to the blade or the sides of the

●

container turn off the appliance, take off the lid and

remove the ingredients from the blade and the sides of

the container (using the spatula).

Grinding hard ingredients such as coffee beans, nutmeg

●

and ice cubes may affect the condition of the blade.

Slicing discs

In order to receive uniform round slices put wide

●

vegetables into the larger feed tube and the thin ones

into the smaller feed tube – separately into the smaller

feed tube and a couple of pieces at a time into the larger

one.

You will receive regular slices without torn edges when

●

the appliance is switched off while lling the feed tube.

To do that you can use the “PULSE” function.

Soft and juicy vegetables should be cut at lower speed,

●

hard vegetables at a faster one.

You can cut 0.8 – 1kg of fruit or vegetables at a time to

completely ll the container.

Shredding discs

You can ll the feed tube during operation.

●

While shredding you can use all available gears. Use

●

lower gears for soft fruits and vegetables and higher

gears for harder ones.

You can cut 0.8 – 1kg of fruit or vegetables at a time to

completely ll the container.

Pureeing disc

You can ll the feed tube during operation.

●

After pureeing approximately 0.5 kg of ingredients stop

●

the appliance and remove the pulp from the lid.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zelmer 880 Seite 79

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zelmer 880

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info