Bedienungsanleitung Zelmer 987 (Seite 27 von 32) (Englisch, Polnisch)

538798

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite



987-001_v01

body and next remove product parts which make it difcult to

mince (e.g. sinews, etc.).

In some cases it is necessary to dismantle the mincer body

and remove the above-mentioned obstacles.

Working with the mincer unit

Insert the following parts into the mincer body (2):

Insert the scroll (3) with the coupling facing inside.

Fit the knife (4) onto the pin of the scroll (3).

Place the screen (e.g. 5) over the knife so that the

protrusion in the mincer body will t into the groove in the

circumference of the screen.

Tightly t all the elements of the mincer unit.

Fit the assembled mincer unit onto the drive unit (1) and

turn it until you hear a click of the lock. It means that the body

has been properly installed.

Place the tray (7) on the mincer body (2).

Preparing the appliance for operation

and switching on the appliance

Take out a sufcient length of the supply cord and the

●

appropriate accessories from the compartment.

Place the motor (1) near the socket, on a hard, stable

surface. Do not cover the ventilation openings of the

housing.

Open the compartment on the back of the housing and

●

take out an appropriate screen (Fig.





Wash all accessories thoroughly before the initial use.

●

Assemble the appropriate accessories and install them

●

on the motor.

Plug in the appliance.

Switch on the appliance using the „I” switch (1a)

(the appliance starts to operate after about 2 seconds).

Operation with the sausage ller nozzle

Insert the following parts into the mincer body (2):

Insert the scroll (3) with the coupling facing inside.

Fit the insert (9) onto the pin of the scroll (3).

Fit the sausage stufng tube (10).

Tightly t all the elements with the threaded ring (6).

Fit the assembled mincer unit onto the drive unit (1) and

turn it until you hear a click of the lock.

Place the tray (7) on the mincer body (2).

Soak the casing for about 10 minutes before tting.

Fit the wet casing on the sausage ller nozzle.

●

        



  





Juicer

The juice squeezer is an equipment included to some

types of mincers. It allows to squeeze juice from fruits such

as: raspberries, currants, strawberries, gooseberry and

additionally from grapes and tomatoes. Berry fruits such

as currants can be squeezed with stalks. Fruits with large

stones for example plums, cherries etc can be squeezed in

the appliance after removing the stones.

Appliance elements:

Chamber

Worm

Body

Nut

Juice channel

Adjusting screw

Bowl (from the mincer unit)

Pusher (from the mincer unit)

Screen – 2 pieces

No. 1 – smaller openings

No. 2 – larger openings

Large sealing ring for the body (3)

Small sealing ring for the worm (2)

Hook

Brush



PREPARING THE JUICER FOR OPERATION

AND ITS OPERATION

Make sure that the sealing rings (10) and (11) are tted

onto the body (3) and the worm (2). If not, insert them into

the sealing grooves in these elements (the body and the

worm).

Insert the screen (9) into the body (3) and press rmly

home.

 

   





Insert the worm (2) into the chamber (1).

Insert the body with the screen onto the worm making

sure that the sieve faces downwards , and the positioning

slot ts into the protrusion in the chamber.

Screw on the nut (4) to attach the body to the

chamber (1).

Screw the adjusting screw (6) into the body (3).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zelmer 987 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zelmer 987

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info