Bedienungsanleitung Zelmer Ceres VC3300.0 ST (Seite 61 von 62) (Englisch, Polnisch)

539655

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

VC3300-001_v01

Installing/deinstalling the CYKLON dust

container

The vacuum cleaner is equipped with a removable CYKLON

dust container (which is a removable part of the vacuum

cleaner) responsible for collecting dirt. After the CYKLON

dust container is full, it has to be emptied.

 Thevacuumcleanerisequippedwithasafety

valvesituatedinthechamberoftheCYKLON

dustcontainer.Itopensupautomaticallywhen

thesuctionhoseoranyelementsattached to

it are completely clogged up, and when the

CYKLONdustcontainerisoverlled.Afterthe

valve is open, you will hear a characteristic

utteringinthevacuumcleaner.

The vacuum cleaner is equipped with a CYKLON dust

container ll indicator (6), and it lights on if the vacuum

cleaner is on (working at full power, and the nozzle or brush

is over the cleaned surface), when there is the need to empty

the CYKLON dust container. The CYKLON dust container ll

indicator (6) may also be on when the suction hose or other

accessories linked to it are clogged up.

Press the on/off button (4) to stop the vacuum cleaner.

Remove the plug of the cord from the socket.

Press the button situated on the end of the hose, and

remove the end of the hose from the inlet of the vacuum

cleaner.

Simultaneously press both CYKLON dust container

unlocking buttons (8), and remove the CYKLON dust

container (18) from the vacuum cleaner by holding the

handgrip (10).

Move the CYKLON dust container over a dustbin. Press

the button situated on the CYKLON dust container – the

bottom of the container opens, and its content falls into the

dustbin.

After emptying the container, snap its bottom shut. Pay

attention that the seal on the bottom of the container remains

correctly placed.

 The container needs to be precisely shut.

Otherwise,dustisgoingtogetintothechamber

ofthevacuumcleaner,andthesuctionpower

isgoingtodecrease.

Place the emptied CYKLON dust container into the

vacuum cleaner. A characteristic “click” signalizes the

container has been properly installed.

It is necessary to empty the CYKLON dust container, if you

notice that:

a) the CYKLON full dust container indicator is on,

b) the vacuum cleaner works less efciently,

c) the CYKLON dust container is full.

Deinstalling the lters

The vacuum cleaner is equipped with the CYKLON dust

container based on cyclone ltration, making it possible to

use the vacuum cleaner without a dust bag. A cyclone lter

uses air stream swirling to separate solid dirt. Separation

of dirt is done in an O-shaped part of the container, where

the swirling air casts away dirt on the wall of the container.

This pre-ltered air is directed into the foam inlet lter and

washable HEPA (High Efciency Particulate Air) inlet lter.

A special ltering material used in the HEPA inlet lter makes

it possible to rinse the lter with running water, if it is dirty,

and reuse it later.

 Incaseofgettingthefoaminletlter(17),the

HEPAinletlter(16),thefoamoutletlter(14)

dirty,youcanreplacethem,cleanthemorrinse

themwithrunningwater.

  It is forbidden to wash lters in washing

machinesordishwashers.

  Filtersmaybedriedonlynaturally.

  Donotusehairdryers,heatersorradiatorsto

drylters.

 Before replacing the lters make sure the

vacuumcleanerisoff,andtheplugofthecord

isunpluggedfromthesocket.

HEPA INLET FILTER AND FOAM INLET FILTER

It is necessary to periodically clean the HEPA inlet lter and

the foam inlet lter to remove small fractions of dust.

Remove the CYKLON dust container and empty it, as

described in para. C.

Remove the HEPA inlet lter (16) from the CYKLON dust

container.

Remove the foam inlet lter (17). If the foam inlet lter

(17) is dirty, you may replace it with a new one, clean it or

rinse it with running water. Before reinstalling the lter, make

sure it is dry.

The main function of the foam inlet lter (17) is to protect the

HEPA inlet lter (16) against excessive dirt.

 Forsafetyreasonsitisunacceptabletoinstall

awetordamagedfoaminletlter(17).

Clean the pleats of the HEPA inlet lter

●

(16), and if the

lter is damaged, it should denitely be replaced with

a new one. If the HEPA inlet lter (16) is dirty, you may

replace it with a new one, clean it or rinse it with running

water. Before reinstalling the lter, make sure it is dry.

 Forsafetyreasonsitisunacceptabletoinstall

awetordamagedHEPAinletlter(16).

Situate the new/rinsed foam inlet lter in the previously

●

determined spot.

Place the new/rinsed HEPA inlet lter (16) in the

previously determined spot in the dust container.

Zelmer Ceres VC3300.0 ST Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info