Bedienungsanleitung Zelmer CK1020 (Seite 35 von 38) (Englisch, Polnisch)

538882

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

37CK1020-001_v01

Technical data

The technical parameters are given on the rating plate of the

product.

1.7 litre capacity.

The kettle is built in insulation class I and is equipped with

a power cord provided with a grounding wire and a grounding

plug.

The kettle meets the requirements of valid standards.

The appliance is compliant with the requirements of the

following directives:

Low Voltage Directive (LVD) – 2006/95/EC. –

Electromagnetic Compatibility (EMC) – 2004/108/EC. –

The product is afxed with the CE mark on the rating plate.

Kettle elements (Fig. A)

Spout

Kettle body

Water level indicator

360° swivel base

Lid release button

On/off switch (0-I with power indicator)

Handle

Anti-deposit lter

Cord storage

Preparing the kettle for operation

Before rst use, wash the kettle inside (for

washing instructions see the “Cleaning and

maintenance” section), ll it with water up to

the “max” level, boil water four times (each

time use fresh water) and wash the kettle inside

again.

Operating the kettle (Fig. B)

Press the lid button (5) – the kettle lid will open.

Place the lter (8) in the kettle (if it is not in place).

Fill the kettle with the desired amount of water (the level

is visible on the indicator (3)).

Do not boil the water if it is below the minimum

level or beyond the maximum level on the

indicator (3).

Close the lid.

Place the kettle on the base (4).

Plug the kettle to a socket provided with an earth pin.

Turn the kettle on by pressing the switch (6) – the power

indicator light will come on.

After the water is boiled, the kettle will switch off

automatically, the lever switch will return to its starting

position and the power indicator will go off.

If you plan to use the kettle again soon, it is not necessary to

remove the plug from the mains.

Make sure that the maximum kettle capacity

is not exceeded when the kettle is lled with

water.

In the event that an empty kettle is switched

on, it will be switched off automatically by

a thermal device.

To switch on the kettle after it has cooled down

(about 15 min), remove it from the base, ll with

water, replace on the base and switch on by

pressing the switch (6). The cooling down of

the kettle can be accelerated by pouring cold

water into the kettle.

Cleaning and maintenance (Fig. C)

Always allow the kettle to cool down completely

before cleaning!

Unplug the kettle from the mains.

Remove the lter (8) and rinse it under running water.

Clean the outside surfaces with a soft damp cloth and

washing-up liquid.

In order to remove the build-up of hard water lm from the

outside and inside walls of the kettle, wipe them with a damp

cloth and vinegar.

Rinse the kettle with fresh water.

Various black-coloured, rusty, milky, etc.

deposits may form inside the kettle and oat on

the water. This is caused by minerals occurring

naturally in water (calcium, magnesium, iron,

etc.). Such discoloration is not caused by faulty

operation of the appliance and does not affect

its use. In case of substantial accumulation of

mineral deposits, proceed as described in the

“Descaling” section.

Descaling

In the event that scale builds up on the bottom of the kettle,

it needs to be removed. For this purpose use 6-10% vinegar

or citric acid.

Open the lid by pressing the lid release button

●

(5).

Add 0.5 l of vinegar or 40 g of citric acid and ll the

●

kettle with water up to the maximum level. Switch on the

kettle.

Bring the mixture to boil and allow the kettle to stand for

●

30 minutes.

Empty the kettle and rinse it with fresh water.

●

Remove the lter

●

(8) and rinse it under running water.

Replace the lter.

Fill the kettle with fresh water, boil the water and empty

●

the kettle.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zelmer CK1020 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info