Bedienungsanleitung Zelmer CK1500 (Seite 48 von 50) (Englisch, Polnisch)

538908

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

50 CK1500-001_v01

6 CK1500-001_v01

Close the lid (5).

Place the kettle on the base (4). Plug the kettle to

a socket provided with an earth pin.

Switch on the kettle by pushing button (10) – the LCD

display (7) will turn blue and the icon will ash. After

some time the illumination will go out (the icon will keep

ashing). The kettle will switch off automatically after boiling.

The kettle has three functions:

boiling water

, keep warm and boiling time . The

selected mode is displayed on the LCD display (7). Func-

tions can be changed using the boiling program selection

button (8). During boiling, the LCD display will turn blue, and

the icon of the selected function will appear on the display.

Default settings: boiling water to 100°C, the keep warm

function in on.

When setting boiling parameters, water temperature may

be adjusted from 40°C to 100°C (each time the button is

pressed the temperature changes by 5°C). The temperature

setting may be changed by pressing the settings buttons

(9). The selected boiling temperature is shown on the LCD

display.

When setting the keep warm temperature, water tempe-

rature may be set between 40°C and 90°C, if the previous

temperature setting was 100°C. If boiling temperature was

set for example to 50°C, the keep warm temperature may be

set from 40°C to 50°C (each time the button is pressed the

temperature changes by 5°C). The set temperature may be

changed by pressing the settings buttons (9). The maximum

duration of the keep warm function is 60 minutes. In order

to switch off the keep warm function, set this parameter to

«00».

 Whenthekeepwarmfunctionison,thekettle

boilswatertothepresettemperature(the

iconashes)andthen switches to thepreset

keepwarmtemperature(the iconashes).

When setting the water boiling time, it may be set from

3 to 6 seconds. The water boiling time may be changed by

pressing the settings buttons (9).

 This setting is effective only when the water

boiling temperature exceeds 95°C.

When nished programming the settings, press button

(10). When in the operation mode, the operation function

icon ashes; the selected water temperature is shown on

the LCD display. When heating starts, a blue light comes on

inside the kettle. To go back to the settings mode, press but-

ton (10) button.

The appliance will switch off automatically after reaching

the set temperature. The light will go out.

 Duringboilingorwhenthekeepwarmfunction

ison,ifyouliftthekettleoffthebaseandput

itbackon,all previous settings willbe reset.

The appliance will automatically go back to

default settings (see

). To use the boiling

functionorthekeepwarmfunction,selectan

appropriate program again.

Ifwatercoolsdown,switchonthekettleagain

toboilorheatwateragain.

If you plan to use the kettle again soon, it is not necessary

to remove the plug from the mains.

Makesurethatthemaximumkettlecapacityis

notexceededwhenthekettleislledwithwater.

Intheeventthatanemptykettleisswitchedon,

itwillbeswitchedoffautomaticallybyathermal

device. In order to switch on the kettle again

afteritcoolsdown(approx.15minutes),liftitoff

thebase,llwithwater,putthekettlebackon

thebaseandswitchonbypressingbutton(10).

Donotllahotkettlewithcoldwater(andthe

otherwayaround).

When llingthekettle,avoidhightemperature

differences.

Cleaning and maintenance

Always allow the kettle to cool down com-

pletely before cleaning!

Unplug the kettle from the mains.

Remove the lter (11) and rinse it under running water.

Clean the outside surfaces with a soft damp cloth

and washing-up liquid.

In order to remove the build-up of hard water lm from the

outside and inside walls of the kettle, wipe them with a damp

cloth and vinegar.

Rinse the kettle with fresh water and assemble the appli-

ance only after all parts have been dried thoroughly.

 Various black-coloured, rusty, milky, etc.

deposits may forminside thekettle and oat

onthewater.Thisiscausedbymineralsoccur-

ring naturally in water (calcium, magnesium,

iron,etc.).Suchdiscolorationisnotcausedby

faulty operation of the appliance and does not

affectitsuse.Incaseofsubstantialaccumula-

tionofmineraldeposits,proceedasdescribed

inthe“Descaling”section.

7CK1500-001_v01

Descaling

In the event that scale builds up on the bottom of the kettle,

it needs to be removed. For this purpose use 6-10% vinegar

or citric acid.

●

Open the lid by pressing the lid release button (6).

●

Pour in 0.5 l of vinegar (or add 40 g of citric acid) and ll

the kettle with water to the MAX level. Switch on the ket-

tle.

●

Bring the mixture to boil and allow the kettle to stand for

30 minutes.

●

Empty the kettle and rinse it with fresh water.

●

Remove the lter (11) and rinse it under running water.

Replace the lter.

●

Fill the kettle with fresh water, boil the water and empty

the kettle.

●

Wipe any remaining limescale with a sponge and rinse

the inside of the kettle with water. Repeat the whole pro-

cess in necessary.

The kettle should be descaled periodically

to avoid its possible damage.

Ecology – environment protection

Each user can protect the natural environment.

It is neither difcult nor expensive. In order to

do it: put the cardboard packing into recycling

paper container; put the polyethylene (PE)

bags into container for plastic.

When worn out, dispose the appliance to particular disposal

centre, because of the dangerous elements of this appli-

ance, which can be hazardous for natural environment.

Donotdisposeintothedomesticwastedisposal!

The importer/manufacturer is not liable for any damages resulting

from improper use or handling of the appliance.

The importer/manufacturer reserves the right to modify the product

at any time and without prior notice in order to adjust it to valid law

regulations, norms, directives, or due to construction, trade, aesthetic

or other reasons.

Zelmer CK1500 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info