Bedienungsanleitung Zelmer Clarris 2700.0 SP (Seite 35 von 38) (Englisch, Polnisch)

539660

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

2700-001_v02

Set the desired power value by pressing the power

adjustment buttons , (11,9).

SAFBAG dust bag disassembly/assembly

The vacuum cleaner is equipped with a dust bag full

indicator (8). When the dust bag full indicator (8) lights

during operation (with the nozzle or the brush lifted above

the cleaned surface) it means that the bag is full and needs

to be replaced. In addition the dust bag full indicator (8) may

activate if the suction hose or the elements attached to the

suction hose are clogged (suction power – level 5).

Switch off the vacuum cleaner by pressing the “on/off”

button (7) and unplug the appliance

Press the two side buttons on the end of the hose and

remove the hose end from the inlet opening of the vacuum

cleaner.

Release the upper cover fastening (12) and open the cover.

Remove the SAFBAG dust bag module (18) from the

vacuum cleaner chamber.

Grab the dust bag cover, gently bend it towards the

inside and remove the whole dust bag upwards.

Insert the plate of the new dust bag in the tracks of the

SAFBAG dust bag module (18) and slide it until stop. The

direction for inserting the dust bag is indicated by the arrow

on the bag.

Slide the SAFBAG dust bag module together with the

installed bag in the tracks located on the side of the vacuum

cleaner chamber. Close the cover by pressing it until you

hear a characteristic click – pay attention not to trap the

dust bag.

DonotvacuumwithouttheSAFBAGdustbag

moduleinstalledintheappliance.Thelackof

the SAFBAGdust bag module prevents from

lockingtheuppercoveroftheappliance.

ZELMER vacuum cleaners are equipped with SAFBAG dust

bags in the amount indicated in the table. It is recommended

to replace the dust bag if:

a) the dust bag full indicator lights up,

b) the vacuum cleaner operates poorly,

c) the dust bag is full.

Filter disassembly

Before changing the lters make sure that the vacuum

cleaner is switched off and unplugged from the mains

supply.

HEPA OUTLET FILTER

The vacuum cleaners are equipped with an H11 outlet lter

HEPA (High Efciency Particulate Air). The HEPA lter has

been designed to maximize its ltration capability through

special bers, which are able to retain almost all dust

particles. The H11 class determines the permeability of

a lter. The HEPA H11 lter retains 95,5% of particles of 0.3

micron.

To replace the HEPA lter lift the vacuum cleaner handle

and open the accessory compartment.

Grab the lter cover by the fastening, rmly pull with the

thumb and lift it upwards

Remove the HEPA lter case and replace it with a new

one. The HEPA lter ensures an effective operation of the

vacuum cleaner for about 1 year.

Insert the cover so that the two protrusions in the lower

part of the cover are inserted in the openings of the vacuum

cleaner body, press the lter cover so that the rear fastenings

snap shot on the body.

INLET FILTER

Release the upper cover fastening (12) and open the

cover.

Remove the SAFBAG dust bag module (18) from the

vacuum cleaner chamber.

Slide the inlet lter casing with the installed inlet lter

from the tracks on the back side of the vacuum cleaner

chamber.

Remove the inlet lter (16) from the inlet lter casing.

Place the new lter in the inlet lter casing (17) with the

material side directed towards the inside of the casing.

Slide the inlet lter casing (17) together with the lter in

the tracks until stop to the previous position.

Alwaysreplaceadamagedinletlter(16)with

abrandnew,originalone.

Insert the SAFBAG dust bag module to the vacuum

cleaner chamber.

Close the cover by pressing it until you hear

a characteristic click – pay attention not to trap the dust bag.

Special accessories

The following special accessories may be purchased in retail

outlets:

Zelmer turbobrush (22)

May be used with all types of ZELMER vacuum cleaners. Is

used for an effective vacuuming of carpets and tted carpets.

While using the turbobrush follow the instruction manual.

The use of the turbobrush decidedly increases the

effectiveness of removing brous dirt such as: animal hair,

hair, threads etc. It is practically useful in households with

pets (cats, dogs), where removing the animal hair from the

carpets and oorings is very onerous.

End of operation cleaning and

maintenance

Switch off the vacuum cleaner by pressing the “on/off”

button (7).

Unplug the appliance.

Wind the cord by pressing the cord rewind button (4).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zelmer Clarris 2700.0 SP Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info