538906
116
Zoom out
Zoom in
Vorherige Seite
1/128
Nächste Seite
116 CM4003-001_v01
Preparing the espresso machine
WATER FILTER – INSTALLATION
The  lter pack cleans water and reduces its carbonate and
non-carbonate hardness.
Depending on water hardness and its actual use, the lter
must be replaced from time to time (see “WATER FILTER
REPLACEMENT”).
1
In order to insert the water lter, take out the water
tank.
2
Remove the coarse  lter by pulling it upward.
3
Insert the  lter pack by pressing it onto the water
outlet.
Soak the lter in water for 5 minutes before
rst use to release the air bubbles and ensure
better performance.
4
Select Filter Operation in the machine settings (see
SETTINGS DIAGRAM AND ORDER).
TESTING WATER HARDNESS
The testing of water hardness will allow you to set the
espresso machine to the optimal value and to brew coffee
in the conditions properly adjusted to the quality of your
water. In order to test the hardness of your water, proceed
as follows:
1
Remove the water hardness test strip from the
package.
2
Fill a glass or other receptacle with tap water and dip
the test strip in water.
3
Wait approx. 15 seconds and compare the colour of the
test strip with the colour scale on the test strip package.
4
Based on the water hardness reading, set the water
hardness level (see the „Setting other functions” /
„WATER HARDNESS” section to nd out how to set the
water hardness).
FILLING THE WATER TANK
1
Make sure that the machine is unplugged from the
power source.
2
Insert the water lter in the tank before rst use. The
detailed procedure is described in the “WATER FILTER
INSTALLATION” section.
3
Check water hardness in your area before rst use.
The detailed procedure is described in the “TESTING
WATER HARDNESS” section.
4
Lift the tank lid and take out the tank using the handle.
5
Fill the container with fresh, cold water.
Never  ll the water tank above the MAX level.
Never  ll the tank with hot or boiling water, as
this may damage the machine.
116

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Zelmer CM4003ALS wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info