Bedienungsanleitung Zelmer Diana 886 (Seite 60 von 62) (Englisch, Polnisch)

538958

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Dear Customers!

Congratulations on your choice of our appliance, and

welcome among the users of Zelmer products.

In order to achieve best possible results we recommend

using exclusively original Zelmer accessories. They have

been specially designed for this product.

We kindly ask you to read the following user manual

carefully. Pay special attention to the indications concerning

the security. Keep the user manual, so that you will be able

to use it also during the future use of the appliance.

The meat mincer is to be used within the house-hold. It is

a multifunctional appliance, which can be used for quick

and effortless mincing of: meat, cheese, vegetables, poppy,

as well as for manufacturing sausages and meat products.

When an additional appliance of the meat mincer is used –

that is the shredder, it is possible to slice vegetables into:

salads, fresh vegetable salads and preserves.

Indications concerning safety and the proper

use of the meat mincer

Do not pull the plug out from the network supply socket

●

by pulling the cord.

The appliance can be connected only to the 230 V

●

alternating current.

Do not actuate the meat mincer, if the power cord is

●

damaged or the encapsulation is visibly damaged.

If the non-detachable part of the cord is damaged,

it should be replaced by the producer or at a proper

service point or by a qualied person in order to avoid

any hazards.

The appliance can only be repaired by qualied service

personnel. Improper servicing may cause a serious

hazard to the user. In case of defects please contact

a qualied service center.

Unplug the appliance after operation. Put away the cord,

●

pushing it gently through the opening and place the plug

in the compartment.

Do not expose the meat mincer or its equipment to the

●

temperature over 60°C. By doing that you can damage

the meat mincer.

Be extremely careful when operating the appliance in the

●

presence of children.

This appliance is not intended for use by persons

●

(including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning use of the appliance by a person responsible

for their safety.

Children should be supervised to ensure that they do not

●

play with the appliance.

Before cleaning the meat mincer

●

always pull the power

cord out from the network supply socket.

In order to push use the pusher. Using other staffs may

●

result in damaging the meat mincer and its drive.

Do not overload the appliance with excessive amount of

●

the product, or by pushing the product too hard (with the

use of the pusher).

Assemble the mincing set accurately, as the improperly

●

screwed mincing set can result in poor mincing quality,

as well as it can cause blunting of the cutter knife and

the screen. Blunt cutter knife and blunt screen should be

replaced with a new one.

Turn the meat mincer off before any change of equipment

●

or before bringing near any parts being in move during

the operation.

When the meat mincer is operating, do not cover the

●

ventilation holes in the casing. Do not place the meat

mincer on soft surfaces.

When the machine does not start – contact the service

●

point and leave the machine for servicing.

Separate the meat, which is to be minced, from bones,

●

tendons, cartilages and veins.

Before mincing, cut bigger parts into smaller elements.

●

Do not mince dry poppy. Before mincing, the poppy

●

needs to be washed with hot water and soaked in water

– up to several hours (a dozen or so).

Never immerse the drive unit of the meat mincer in water.

●

Never wash it under the running water.

Do not wash the equipment assembled within the drive

●

unit.

Do not use aggressive detergents in the form of

●

emulsion, milk, paste, etc. in order to wash the casing.

Among others, they can remove the informative graphic

symbols placed on the meat mincer, such as: scales,

marks, warning signs, etc.

Use a soft brush in order to wash the metal parts.

●

Do not wash the metal parts in the dishwasher.

Aggressive cleaning agents used in these appliances

can cause darkening of the above-mentioned parts.

Wash them manually, with the means of traditional

dishwashing liquids.

Technical data

Technical parameters are given on the product’s data plate.

Allowed time of continuous work of the meat mincer

10 minutes

Required break before following use of the meat mincer

30 minutes

Noise level (L

): 77 dB/A

The appliance features double electrical insulation (Class II)

and does not require grounding.

ZELMER meat mincers meet the requirements of the

following applicable standards.

The meat mincer complies with the requirements of the

following directives:

Low voltage device (LVD) – 2006/95/EC. –

Electro-magnetic compatibility (EMC) – 2004/108/EC. –

The product has been marked with the CE mark on the data

plate.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zelmer Diana 886 Seite 60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info