Bedienungsanleitung Zelmer EK1300 (Seite 52 von 54) (Englisch, Polnisch)

539634

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

56 EK1300-001_v02

Selecting the fry function or the steam

function (Fig. E)

After selecting the Meat, Fish or Vegetables function,

the icon „steam” will begin to ash on the display The “Meat”

function has been selected as an example.

In order to change the “Steam” function into the „Fry”

function, press the “Steam/Fry” button (24).

The appliance will display the minimum cooking time for

the selected function (see the table (Fig. J)).

Then, proceed according to the user manual.

Changing the cooking time (Fig. F)

After selecting the desired function, in order to change

the cooking time it is necessary to press the “Timer” button

(25). The cooking time setting will begin to ash on the

display.

Use the button in order to set the desired cooking

time.

When the maximum cooking time for the

selected function exceeds 60 minutes, you can

use the button to change the hour setting.

The appliance is also provided with the “Preset”

function. You can optionally set the end of cooking time.

In order to set the end of cooking time, press “Preset”

button (26). The time setting selected in the previous cooking

cycle will ash.

In order to change the time setting, use the button

(hour setting) and the button (minute setting).

After setting the function and the cooking time or

optionally applying the “Preset” function, press the “Start”

button (28). The appliance will start the cooking process

unless the “Preset” function has been selected.

After nishing the cooking cycle the appliance will go into

the keep warm mode and the message “End” will appear on

the display.

In order to achieve good cooking results, it is

necessary to use the proper functions with the

time settings properly selected for cooking or

frying a particular dish. Extend the cooking

time when necessary.

Additional Reheat and Boil functions (Fig. G)

The “Preset” option is not available for the

Reheat and Boil functions.

Press the “Menu/ON” button (23) and select the

„Reheat” function or the „Boil” function by means of the or

button.

The appliance will display the minimum cooking time for

●

the selected function (see the table (Fig. J)).

In order to change the time setting, press the “Timer”

button (25) (the time setting will begin to ash on the display).

Then, set the time by means of the button.

Then, after setting the desired function, press the

●

“Start”

button (28).

In order to speed up the cooking of certain

products or dishes, before starting the desired

function you can boil the water using the Boil

function and then set the desired function in

order to continue cooking.

The temporary store function: If during the

cooking process the appliance has been

disconnected from the electricity supply for not

longer than 30 minutes, the cooking process will

be automatically resumed after reconnecting

to the electricity supply. If the appliance has

been disconnected from the electricity supply

for more than 30 minutes, the appliance will be

automatically turned to the stand-by mode after

reconnecting to the electricity supply.

After the cooking (Fig. H)

Turn off the appliance and disconnect the power cord

●

from the mains outlet.

Before starting to dismantle the appliance,

make sure that the appliance has been

disconnected from the electricity supply and

that the appliance interior has cooled down to

the room temperature.

Open the lid by means of the lid release mechanism (7).

Remove the pot (14) and the optional steam basket

(15)).

Dismantle the removable inner lid (4) by pulling up the

removable inner lid release mechanism (2).

Dismantle the steam valve (11) by pulling it up.

Separate the two parts of the steam valve by turning the

lower part anti-clockwise.

Remove the drip tray (20).

Wash all the elements following the rules provided in the

●

Cleaning and maintenance section (Fig. I)

Once the elements have dried up, reassemble the

●

appliance in the reverse order.

If mounted improperly, the steam valve

may have negative impact on the quality of

appliance operation.

After each use of the appliance, empty the drip

tray (20) located at the rear of the appliance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zelmer EK1300 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info