Bedienungsanleitung Zelmer Tiny VC1400.0 SK (Seite 56 von 62) (Englisch, Polnisch)

539694

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

62 VC1400-001_v02

Before rst use

Put the end of the suction hose to the inlet of the vacuum

cleaner. Pay attention to insert the protrusions situated on

the end of the hose into the special incisions in the inlet of

the vacuum cleaner.

With a clockwise movement turn the end of the suction

hose tight.

Attach the other end of the hose (the handle) to the

suction tube. In order to do this, press the lock A in the

telescopic suction tube and put the tube in the handle, so the

lock A is fastened in hole B.

Select the needed length of the telescopic suction pipe

by sliding the slider according to the arrow, and pulling the

pipe out/in.

Install a nozzle or a brush on the other end of the suction

pipe.

You may install a basket for collecting small objects in

the nozzle brush with a small object separator. In order to do

this, remove the hole plug, and insert the basket.

For hard surfaces (wooden oors, plastic oors, ceramic

tiling, etc.) pull out the brush by pressing the switch on the

nozzle brush as it is shown in the picture .

Grab the plug of the cord (3), and pull it out of the vacuum

cleaner.

 Whenpulling outthecordpayattentiontothe

yellowbandwhichmarkstheendofthecord.Any

attempts tounwindthe cord further(especially

forcefullypullingonit)mayleadtodamagingit.

Put the plug of the cord in an electric socket.

Before turning the vacuum cleaner on, make sure the

CYKLON dust container is installed in the chamber of the

vacuum cleaner, and also the basic lter and the outlet lter

are installed in the vacuum cleaner.

Press the on/off button to start the vacuum cleaner.

The vacuum cleaner is equipped with an electronic

controller of suction power, which enables smooth regulation

of suction power of the vacuum cleaner. Turn the dial up or

down to respectively increase or decrease suction power.

Design

Outlet lter cover

Fastening for the nozzle brush

Plug with the power cord

Locker for the crevice nozzle

Fastening of the upper cover

ON/OFF button

Suction power regulation dial

Cord winder button

Handle

Bolt – a mechanic controller of suction power

Suction hose

Telescopic suction pipe

Outlet microlter (installed in the vacuum cleaner)

HEPA H12 basic lter (installed in the CYKLON dust

container)

HEPA H12 basic lter protective casing (installed in the

CYKLON dust container)

CYKLON dust container (a removable part of the vacuum

cleaner)

CYKLON dust container cover

Nozzle brush with a small object separator

Crevice nozzle

Small brush

Small nozzle

BNB (Brush Natural Bristle) oor brush (an additional

accessory – available in retail outlets with vacuum

cleaners)

Turbobrush (an additional accessory – available in retail

outlets with vacuum cleaners)

TYPES OF VC1400 VACUUM CLEANERS

Design and

accessory

options

Type

Max power

Suction power control

Suction pipe

Nozzle brush

Small nozzle

Crevice nozzle

Small brush

1 2 3 7 8 9 10 11

VC1400.0SF 1700 W + Telescopic + + + +

VC1400.0SK 1900 W + Telescopic + + + +

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zelmer Tiny VC1400.0 SK Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info