Bedienungsanleitung Zelmer ZME 9011EE (Seite 68 von 76) (Englisch, Polnisch)

539802

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

68 ME-004_v01

ATTENTION! The producer cannot be held responsible for any damages that occur

due to improper installation or misuse of the oven.

After connecting the oven, you should:

Put the oven into the unit paying attention not to block the cable or place it on the top

of the oven.

Secure the oven to the casing by four screws provided in the set driver into the holes

which can be seen when the door is open.

Check whether the walls of the oven are separated from the casing and if there is at

least 2mm from the elements of the units situated in the vicinity of the oven.

Power supply

The person responsible for the connection of the power supply should check whether:

The voltage of the power supply corresponds to the requirements given on the rating

●

plate.

Wiring corresponds to maximum power given on the rating plate.

●

The connection diagram is proper to what is shown on the ﬁ gure below.

●

The connection is grounded according to the appropriate regulations.

●

The connection is done by using a multi-pole switch appropriate to the load. The

●

distance between the contacts must be at least 3 mm, to allow disconnection in case

of danger or during light bulb cleaning/changing. In any case the grounding cable

should not pass through the switch.

After connecting the power, all electric elements should be checked to determine whether

they are properly working.

Using the oven

SETTING THE TIME

After plugging the oven in, you will see 12:00 and a light ﬂ ashing over the symbol .

By pushing buttons

and you may set the right time. After the time is saved, the

light will automatically go off.

OVERRIDE

After time setting, the oven is ready to use. You should select oven temperature and

mode.

In order to turn the oven off, set the controls to

PROGRAMMING THE CLOCK MODE

Warning mode: the mode products a warning sound in a given time.

Grilling time: the mode enables programming the oven to work for a given time, after

which it will automatically turn itself off.

Grilling time end: the mode enables you to establish a precise time, when the oven will

automatically turn itself off.

Duration time and automatic shutdown: this mode combines work duration with exact

time when the oven will automatically turn itself off. You can deﬁ ne automatically the

beginning and end of work of the oven.

Clock lamp: clock lamp may be turned off, when the oven is not used.

WARNING MODES

Press the MODE button until the light above the symbol starts ﬂ ashing.

Select the hour, when the sound signal will be heard by pressing the and

buttons.

The light will stay turned on, indicating the alarm has been programmed.

At the end of programmed time, an alarm will be set off and a light will ﬂ ash.

Push any button to turn the alarm off, and return the oven to displaying the current

time.

GRILLING TIME

Push the MODE button until the indicator above the symbol starts ﬂ ashing.

Select duration time by pushing the and buttons.

The ﬂ ashing indicator will light up, informing you the oven will turn off automatically.

The clock will return to showing the current time.

Select oven temperature and mode.

When the given time passes, the oven will turn off, alarm signal will go off, and the

indicator will start ﬂ ashing.

Push any button to turn the alarm off. The oven will turn on again.

In order to turn off the oven, place the settings in the position.

GRILLING TIME END

Push the MODE button until the indicator above the symbol starts ﬂ ashing.

Select the time, when the oven needs to start working by pressing the and

buttons.

The ﬂ ashing indicator will light up, informing you the oven will turn off automatically.

The clock will return to showing the current time.

Select oven temperature and mode.

When the given time passes, the oven will turn off, alarm signal will go off, and the

indicator will start ﬂ ashing.

Push any button to turn the alarm off. The oven will turn on again.

In order to turn off the oven, place the settings in the position.

DURATION TIME AND AUTOMATIC SHUTDOWN

Push the MODE button until the indicator above the symbol starts ﬂ ashing.

Select duration time by pushing the and buttons.

You will see next that the indicator is no longer ﬂ ashing, and is lit up.

Push the MODE button until the indicator above the symbol starts ﬂ ashing.

Select the time, when the oven needs to start working by pressing the and

buttons.

You will see next that the indicator is no longer ﬂ ashing, and is lit up.

Select oven mode and temperature.

The oven will remain turned on and the indicators above the and symbols

will be lit.

The oven has been successfully programmed.

When the time comes, the oven will start working for the programmed amount of time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zelmer ZME 9011EE Seite 68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info