729841
26
Zoom out
Zoom in
Vorherige Seite
1/41
Nächste Seite
50 Rev.A 51 Rev.A
NAVIGATION SOFTWARE INSTALLATION
Before you can use the Z-N328 navigation software supplied on microSD card, the Android
device (Z-N328) must be prepared by installing a software.
a. Insert the provided mircoSD card with navigation software into the respective slot of the
device. Turn on the device.
b. Tap on the “navigation source icon” in the main menu to start the standard installation process
(illustration 1).
c. The software installation will run in a step-by-step mode. A visual software installation status bar
allows you to track progress (illustration 2). The complete update process takes approx.
30 ~ 60 seconds.
d. Finally, the navigation will be start automatically if the installation was successful. Device should
show navigation loading mode (illustration 3). Now follow the navi startup wizard and pay attention
to the info given under “Sat-Fix” below.
NAVIGATION START UP INSTRUCTIONS
Illustration 1
Illustration 2
Illustration 3
1
2
FIRST NAVI START-UP (SAT FIX PROCESS)
After the device install is completed make sure, the vehicle is located outdoors under free sky.
There should be no objects above vehicle affecting GPS reception (trees, tall buildings etc.).
Tap on the navigation icon in the main menu to start the navigation mode. Tap on “Show Map” to
initiate the “search GPS” process.
Allow 3 to 5 minutes of time to for the creation of the so called Sat-Fix. During this period, the
vehicle must not move nor drive!
Online Updates (Map Content + Bugfixes)
Naviextras Toolbox is a Windows utility, able to establish the server access to the Naviextras portal.
Before you update the navigation content of your microSD card, always download, install and use
the latest Toolbox software.
Before you can download content and updates you are asked for setting up a user account on the
Naviextras portal. Once the Toolbox software has installed a login window pops open to indicate
readiness for user account setup.
With the user account ready make sure the first step is backing up the microSD card content prior to
any content update. Data backup is offered automatically with Toolbox recognizing a valid nav
license on the microSD card.
Do not start update before you have not created a backup. The backup allows you to restore
original map data of the package, which is a welcome help to cope with update or installation
problems, which would otherwise become costly software restore processes.
Important: When a free or pay type content update was installed on the microSD card, the following
two steps must be completed to reactivate the license:
1) Insert the microSD card into your naviceiver and start the navigation.
Shut down device, remove the microSD card.
2) Start Toolbox and connect the microSD card to your PC or notebook and follow the instructions of
the software (activation of license).
NAVIGATION START UP INSTRUCTIONS
26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Zenec Z-N328 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Zenec Z-N328

Zenec Z-N328 Bedienungsanleitung - Deutsch - 41 seiten

Zenec Z-N328 Bedienungsanleitung - Holländisch - 41 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info