Bedienungsanleitung Zenec Z-N956 (Seite 27 von 43) (Englisch)

729839

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

52 Rev.D 53 Rev.D

NAVIGATION SOFTWARE INSTALLATION

Before you can use the Z-N956 navigation software supplied on microSD card, the Android

device (Z-N956) must be prepared by installing a software.

a. Insert the provided mircoSD card with navigation software into the respective slot of the

device. Turn on the device.

b. Tap on the “navigation source icon” in the main menu to start the standard installation process

(illustration 1).

c. The software installation will run in a step-by-step mode. A visual animated software installation

status bar allows you to track progress (illustration 2). The complete update process takes approx.

30 ~ 60 seconds.

d. Finally, the navigation will be start automatically if the installation was successful. Device should

show navigation loading mode (illustration 3). Now close the navigation software, turn off the device

and read the info given under “Sat-Fix” below.

NAVIGATION START UP INSTRUCTIONS

Illustration 1

Illustration 2

Illustration 3

FIRST NAVI START-UP (SAT FIX PROCESS)

› After the device install is completed make sure, the vehicle is located outdoors under free sky.

There should be no objects above vehicle affecting GPS reception (trees, tall buildings etc.).

› Tap on the navigation icon in the main menu to start the navigation mode. Tap on “Show Map” to

initiate the “search GPS” process.

› Allow 3 to 5 minutes of time to for the creation of the so called Sat-Fix. During this period, the

vehicle must not move nor drive!

Online Updates (Map Content + Bugfixes)

Naviextras Toolbox is a Windows utility, able to establish the server access to the Naviextras portal.

■BeforeyouupdatethenavigationcontentofyourmicroSDcard,alwaysdownload,installanduse 

the latest Toolbox software.

■Beforeyoucandownloadcontentandupdatesyouareaskedforsettingupauseraccountonthe 

Naviextras portal. Once the Toolbox software has installed a login window pops open to indicate

readiness for user account setup.

■WiththeuseraccountreadymakesurethefirststepisbackingupthemicroSDcardcontentpriorto

any content update. Data backup is offered automatically with Toolbox recognizing a valid nav

license on the microSD card.

■Donotstartupdatebeforeyouhavenotcreatedabackup.Thebackupallowsyoutorestore 

original map data of the package, which is a welcome help to cope with update or installation

problems, which would otherwise become costly software restore processes.

■Important:WhenafreeorpaytypecontentupdatewasinstalledonthemicroSDcard,thefollowing

two steps must be completed to reactivate the license:

1) Insert the microSD card into your naviceiver and start the navigation.

Shut down device, remove the microSD card.

2) Start Toolbox and connect the microSD card to your PC or notebook and follow the instructions of

the software (activation of license).

NAVIGATION START UP INSTRUCTIONS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zenec Z-N956 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zenec Z-N956

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info