Bedienungsanleitung Zepter PWC-301 TuttoSteamy (Seite 17 von 20) (Englisch)

657586

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

13  CLEANING AND MAINTENANCE

NOTE: All maintenance jobs must be carried out only when the

appliance is cold and unplugged.

CAUTION!

• Before carrying out any maintenance or cleaning, remove the plug from the socket.

• Do not empty the boiler if there is still hot water inside.

• To prevent the accumulation of limescale, descaling is recommended as follows:

Soft water - every 75 lls

Hard water - every 50 lls

Very hard water - every 30 lls

• When long inactivity is expected, it is recommended that you empty the

water out of the boiler.

• Always leave both the equipment and the iron to cool before putting them

away.

• Always follow the instructions and keep your appliance in good working

condition.

• If the appliance is lent to other people, always supply the instruction manual

with it.

CLEANING

• Clean the outside of the appliance with a damp cloth. Avoid using solvents

or detergents.

• Never use solvents as they could damage the plastic areas of the appliance.

• Clean the iron sole plate when still warm using specic products and a dry cloth.

• Clean the accessories using only water.

• Leave the cleaned brushes to dry with their bristles facing upwards to

prevent warping.

DESCALING THE BOILER USING THE DESCALER

Special descaler - STOP-CALC can be purchased separately under item code

PWC-300-57).

Please contact ZEPTER sales personal to order STOP-CALC.

The descaler prevents limescale from forming on the components of the

appliance and in the pipes which come into contact with steam.

ATTENTION!

If STOP-CALC PWC-300-57 is used, follow next recommendations.

Do not swallow. Do not mix with other substances. If the product comes into

contact with the eyes or face, wash with plenty of water. Store in its original

container, keeping it tightly closed.

Keep out of the reach of children. The appliance cannot be used as long as the

liquid is inside the boiler.

1dGH=10mg/L CaO (Calcium oxide) = 17.848 ppm

Recommended descaling frequency:

Soft water - every 75 lls

Hard water - every 50 lls

Very hard water - every 30 lls

• To nd out the water hardness in your area, contact your municipal

authorities or water utility company

1) Pour about 1 litre of hot water into the appliance

2) Pour the contents of HALF the bag provided and allow the solution to work

for about 8 hours.

3) Do not close the cap.

4) Rinse the boiler twice or 3 times after descaling to remove any residues.

To empty the boiler, turn the device upside down and let the water drain out.

• The contents of the bag provided is enough for two descaling operations.

5) It is recomended to using only Zepter descaler.

• To ensure the eective and long life of the appliance, the boiler is best descaled

according to the following table of dGH-degrees of general hardness.

Classification Hardness in mg/L Hardness in dGh/°dH

Soft 0-60 0.3-3.00

Moderately hard 61-120 3.72-6.75

Hard 121-180 6.78-10.08

Very Hard ≥ 181 ≥ 10.14

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zepter PWC-301 TuttoSteamy Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info