Bedienungsanleitung Zgonc YPL 1250 (Seite 11 von 32) (Deutsch, Englisch, Französisch, Italienisch)

781877

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

11 І 32

Device Description (Fig.1)

1. Dust guard

2. Locking sleeve

3. Selector switch for hammer drilling/chiseling

4. ON/OFF switch

5. Handle

6. Status indicator

7. Power cable

8. Additional handle

9. Depth stop

Unpacking

• Open the packaging and remove the device care-

fully.

• Remove the packaging material as well as the pack-

aging and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for transport

damage.

• If possible, store the packaging until the warranty

period has expired.

ATTENTION

The device and packaging materials are not toys!

Children must not be allowed to play with plastic

bags, lm and small parts! There is a risk of swal-

lowing and suffocation!

Proper use

The tool is designed for drilling with hammer action in

concrete, rock and brick, as well as for chiseling work,

always using the respective correct drill or chisel bit.

The equipment is to be used only for its prescribed

purpose. Any other use is deemed to be a case of mi-

suse. The user / operator and not the manufacturer will

be liable for any damage or injuries of any kind caused

as a result of this.

Please note that our equipment has not been designed

for use in commercial, trade or industrial applications.

Our warranty will be voided if the machine is used in

commercial, trade or industrial businesses or for equi-

valent purposes.

Safety information

General safety instructions for electric tools

m CAUTION: Read all safety regulations and ins-

tructions. Any failures made in following the safety

regulations and instructions may result in an electric

shock, re and/or serious injury.

Keep all safety regulations and instructions in a

safe place for future use.

Introduction

MANUFACTURER:

scheppach

Fabrikation von Holzbearbeitungsmaschine GmbH

Günzburger Straße 69

D-89335 Ichenhausen

DEAR CUSTOMER,

We hope your new tool brings you much enjoyment and

success.

NOTE:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by the

product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

• Application other than specied,

• A breakdown of the electrical system that occurs due

to the non-compliance of the electric regulations and

VDE regulations 0100, DIN 57113 / VDE0113.

WE RECOMMEND:

Read through the complete text in the operating instruc-

tions before installing and commissioning the device.

The operating instructions are intended to help the user

to become familiar with the machine and take advan-

tage of its application possibilities in accordance with the

recommendations. The operating instructions contain

important information on how to operate the machine

safely, professionally and economically, how to avoid

danger, costly repairs, reduce downtimes and how to in-

crease reliability and service life of the machine.

In addition to the safety regulations in the operating

instructions, you have to meet the applicable regula-

tions that apply for the operation of the machine in your

country. Keep the operating instructions package with

the machine at all times and store it in a plastic cover

to protect it from dirt and moisture. Read the instruction

manual each time before operating the machine and

carefully follow its information. The machine can only be

operated by persons who were instructed concerning the

operation of the machine and who are informed about

the associated dangers. The minimum age requirement

must be complied with. In addition to the safety require-

ments in these operating instructions and your country’s

applicable regulations, you should observe the generally

recognized technical rules concerning the operation of

woodworking machines

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zgonc YPL 1250 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info