Bedienungsanleitung Zibro DONATA 124 IDRO (Seite 4 von 62) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

564201

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Turn off the pellet boiler stove by

pressing button , for a couple

of seconds until “OFF” is shown

on the upper display.

REMARKS:

In case of repeated ignition lock-outs, while pellets are fed

regularly, there may be a problem caused by a failing elec-

tric glow plug. In this case, while you wait for a technician,

the pellet boiler stove can be manually started by using so-

lid fuel cubes (ﬁrelighters).

Manual starting procedure:

• open the door;

• take a solid fuel cube and place it inside the brazier toge-

ther with some pellets;

• light a match and set re to the solid fuel inside the

brazier;

• wait a couple of minutes, close the door;

• follow the regular ignition procedure.

Working power and water temperature settings

Room temperature setting

To set the room temperature,

press the key twice: you

will see the words

“SET ARIA” blin-

king on the lower display. You will

read the set temperature on the

upper display.

Use the keys and to

change the value.

Use the keys and to increase and reduce the

wished value.

Water temperature range: 30°C – 80 °C

Procedure to turn off the pellet boiler stove

Pellet feeding will stop immediately but the pellet boiler stove

will continue working until the accumulated heat is fully consu-

med, turning itself off automatically after approx. 30 minutes.

The heating power is set by the

keys

and

. A heating po-

wer at Po 9 is suggested during

the ﬁrst working hours of the stove.

To set the water temperature

press the key only once. You

will see the words “Set H2o” blin-

king on the upper display. You

will read the water temperature

on the lower display.

REMARKS:

The pellet boiler stove is ﬁtted with

an automatic device that allows clea-

ning the brazier after a given period of

time: when this time is detected, the

stove ﬁre automatically reduces and

“PUL FIRE” is shown on the display. After

some minutes, the pellet boiler stove

will start working regularly.

Room temperature range: 7°C – 40 °C

Fan speed setting for hot air

It is possible to activate or deactivate the room ventilator pla-

ced on the front part of the stove.

The fan can be set with 5 different working speeds.

To set the fan for hot air, please join the following procedu-

re: press the key twice to enter the setting menu for

room temperature. On the upper display, next to the room

temperature, there is a value which can go from 0 to 5.

Pressing the key to increase power you can scroll the

5 available speeds. If you set the value “0”, you will deac-

tivate the fan.

On the following example, the

fan for hot air is switched off.

The speed is set on “0”.

On the following example, the

fan for hot air is working at its

highest speed 5.

WARNING

Do not unplug the power plug to turn off the pellet boiler sto-

ve; wait until the automatic shutdown cycle ﬁnishes: the con-

tinuous operation of the fumes extraction fan is normal and

may indicate that the stove is still hot.

In the event of low tem-

peratures, it might happen that the stove - although switched

off - starts the smokes fan and circulator for some minutes in

order to prevent ice formation on the pipes of the system. in

the event there is a power drop, the main board will exhaust

the smokes residuals as soon as the power supply is back on.

In order to do that, the main board will increase the speed and

show the words “Cool FIRE” on the display. As soon as the co-

oling phase has been completed, the stove will automatically

start up working as it was set before the power drop.

CAUTION!

Do not use any ﬂammable liquid to start the stove.

During the reload phase, do not bring the bag of pellets

in contact with the hot pellet boiler stove.

CAUTION!

This adjustment is only useful for turning on and off the

hot-air delivery system because the temperature coming

from the grates depends on the pellet boiler stove status.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zibro DONATA 124 IDRO Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info