Bedienungsanleitung Zibro LC-400 Toyotomi (Seite 23 von 168) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch)

650597

Zoom out

Zoom in

Vorherige Seite

1/168

Nächste Seite

H: When the mark

appears, the childproof

lock has been activated.

J CHILDPROOF LOCK / PARENTAL CONTROL

The childproof lock can be used to prevent children accidentally changing the

heater settings. When the heater is burning and the childproof lock is on, the heater

can only be switched off. Other functions are blocked then. If the heater has already

been switched off, the childproof lock also prevents accidental ignition of the

heater.

Activate the childproof lock by pressing the appropriate key  and holding

it down for more than 3 seconds. The KEY-LOCK indicator

will appear on the

information display (Fig. H), indicating that the childproof lock has been activated.

Switch off the childproof lock by pressing the key  and holding it down for more

than 3 seconds once again.

K THE CORRECT USE OF ‘SAVE’

The ‘SAVE’ function allows you to limit the temperature. When this function is

activated, the heater will automatically switch off, when the room temperature exceeds

the set temperature by 3°C. Subsequently, when the room temperature has dropped

again to the set temperature, the heater will automatically switch on again. Activate the

‘SAVE’ setting by pressing the appropriate



key. will display on the information

display (Fig. I).

Switch off the function by pressing the SAVE key once again.

Without the ‘SAVE’ setting your heater will maintain the set temperature by

approximation as well, by adjusting its heating capacity. ‘SAVE’ is an economy

setting, which you can use when, for instance, you are not present in the room

or to keep it frost-free.

L THE ‘FUEL’ INDICATOR

When the FUEL indicator appears, it means that there is only fuel left for 10

more minutes. The count-down of the remaining heating time can be seen in the

information display  (Fig. J). Now you have two options:

 you remove the fuel tank and refill it outside the living room (Section B) or

 you push the button extension . By pushing this button, the remaining

heating time will extend to 90 minutes.

The heater will automatically switch back to its lowest position. In the display

the number 90 will appear, which will decline to 10. At the arrival of 10,

you will hear an alarm signal every two minutes, warning you to refill the

removable tank. If you do not react, the heater will extinguish by itself. The

heater will also sound a warning signal, when it switches off. The fuel

indicator will blink, while four lines (--:--) are blinking in the information

display. You can stop this by pressing the button  once more.

Once the heater has used up all its fuel and extinguished, it will take some time,

after the refill, before the heater is completely ready for use again.

J: When the FUEL

indicator has appeard,

the information display

will show the number of

minutes of fuel left in

the tank.

I: When the SAVE func-

tion is activated, the

heater will automatically

switch on or off in order

to remain within a speci-

fied temperature range.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zibro LC-400 Toyotomi Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zibro LC-400 Toyotomi

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info