Bedienungsanleitung Zibro LC-DX320 Toyotomi (Seite 21 von 146) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch)

650595

Zoom out

Zoom in

Vorherige Seite

1/146

Nächste Seite

Without the SAVE setting your heater ill maintain the set temperature by

approimation as ell, by adjusting its heating capacity. SAVE is an economy

setting, which you can use when, for instance, you are not present in the room

or to keep it frost-free.

K THE ‘FUEL’ INDICATOR

When the UEL indicator appears, it means that there is only fuel left for 10

more minutes. The count-don of the remaining heating time can be seen in the

information display  (ig. K). No you have to options:

 you remove the fuel tank and refill it outside the living room (Section B) or

 you push the button extension K . By pushing this button, the remaining

heating time ill etend to 0 minutes.

The heater will automatically switch back to its lowest position. In the display

the number 0 ill appear, hich ill decline to 10. At the arrival of 10,

you will hear an alarm signal every two minutes, warning you to refill the

removable tank. If you do not react, the heater will extinguish by itself. The

heater will also sound a warning signal, when it switches off. The fuel

indicator ill blink, hile four lines (--:--) are blinking in the information

display. You can stop this by pressing the

button  once more.

Once the heater has used up all its fuel and extinguished, it will take some time,

after the refill, before the heater is completely ready for use again.

L THE ‘VENT’ INDICATOR

When there is insufficient ventilation in the room, the heater shuts off

automatically. When this occurs,

e -1 1 is displayed and the VENT indicator is

blinking (fig. L). After improving the ventilation of the room (e.g. by opening

a door or window a little more), the heater can be ignited by pushing the

button  again.

M MAINTENANCE

Sitch off the heater and let it cool don, before you start any maintenance

ork. Also disconnect the plug from the mains. Your heater needs hardly any

maintenance. It is, however, important that you clean the vent filter  with a

vacuum cleaner and the grid  with a damp cloth, both on a weekly basis.

Regularly inspect the fuel filter as well:

Remove the removable tank  from the heater and remove the fuel filter

(ig. M). Some drops may leak from the filter keep a cloth at hand.

Remove the dirt by tapping the fuel filter upside-don against a hard surface.

(Never clean it with water!)

Reinstall the fuel filter into the heater.

We recommend that you remove dust and stains from time to time with a damp

cloth, because otherwise these may cause stains that are hard to remove.

Do not remove any heater components yourself. Alays contact your dealer

for repairs. When the power cord is damaged, it may only be replaced by an

authorised fitter. Use a ne cord of the type H05 VV-.

Fuel filter

K: When the FUEL

indicator has appeard,

the information display

will show the number of

minutes of fuel left in

the tank.

L: A blinking VENT

indicator is a sign

that you need extra

ventilation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zibro LC-DX320 Toyotomi Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zibro LC-DX320 Toyotomi

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info