Fit the telescopic slide bar Q to the window and adjust the length. Put the
slidebar connector P in the opening in the telescopic slide bar. Close the
window or door as much as possible to prevent outside air entering the
room. Ensure that the slidebar connector P has a free flow outside.
C
O P E R AT I O N
1. CONNECTING TO THE MAIN
I n s e r t the plug in the wall socket. Then press to switch the unit on or off.
A buzzer will beep, and the LCD will display 12:00 o’clock as default.
2. SETTING THE CLOCK
Press the push button for 3 seconds to set the clock. The 2 left digits of the
4 digits on the LCD-display will flash.
Press or to adjust the hour.
Press momentarily, the 2 right digits of the 4 digits will flash.
Press or to adjust the minutes of the clock.
Press the push button for 3 seconds again to activate the clock.
3. TEMPERATURE SETTING UP/DOWN
If you want to change the set temperature press or to set the temperature.
The 2 digit display will indicate the set temperature.
N O T E
Reaching the set temperature is up to surrounding room conditions.
I M P O R TA N T
The flexible exhaust hose should be less than 1m during operation,
which provides the best performance. This length has been designed
especially according to the specifications of the air conditioner. Do not
use an extension or exchange for a different hose as that may lead to
malfunctioning. The exhaust air must flow freely, any blockage can lead
to overheating of the air conditioner. Take care to prevent any sharp
bow or bend in the exhaust (see pictures).
4
64
88:88
8 8:88
