Bedienungsanleitung Zibro SRE 149TC (Seite 9 von 14) (Englisch)

460399

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

☞

J THE CORRECT USE OF 'SAVE'

The 'SAVE' function allows you to limit the temperature. When this function is

activated, the heater will automatically switch off, when the room temperature

exceeds the set temperature by 3°C. Subsequently, when the room temperature has

dropped again to the set temperature, the heater will automatically switch on again.

ctivate the 'SAVE' setting by pressing the appropriate

ƽ k

ey. will display on the

information display (Fig. I). Switch off the function by pressing the SAVE key once

again.

Without the 'SAVE' setting your heater will maintain the set temperature by

approximation as well, by adjusting its heating capacity. 'SAVE' is an economy

setting, which you can use when, for instance, you are not present in the room or

to keep it frost-free.

K THE 'FUEL' INDICATOR

When the FUEL indicator appears, there is enough fuel left for another 10 minutes

of heater use. The count-down of the remaining heating time can be seen in the

information display

¸ (Fig. J). Every two minutes an alarm signal is sounded,

warning you to refill the removable tank. If you do not react, the heater will

extinguish by itself. The heater will also sound a warning signal, when it switches

off. The FUEL indicator will blink, while four lines are blinking in the information

display. You can stop this by pressing the button

¹ once.

Once the heater has used up all its fuel and is extinguished it will take some time,

after the refill, before the heater is completely ready for use again.

L THE 'VENT' INDICATOR

When the VENT indicator starts blinking, this is a sign that the room is not vented

sufficiently (Fig. K). The heater will switch off automatically. If the indicator

continues blinking after extra ventilation, please contact your dealer.

M MAINTENANCE

Switch off the heater and let it cool down, before you start any maintenance

work. Also disconnect the plug from the mains. Your heater needs hardly any

maintenance. It is, however, important that you clean the vent filter

ᕨ with a

vacuum cleaner and the grid

ᕢ with a damp cloth, both on a weekly basis.

Regularly inspect the fuel filter as well:

Remove the removable tank

ᕦ from the heater and remove the fuel filter

(Fig. L). Some drops may leak from the filter; keep a cloth at hand.

Remove the dirt by tapping the fuel filter upside-down against a hard surface.

(Never clean it with water!)

Reinstall the fuel filter into the heater

Fuel filter

K: A blinking VENT

indicator is a sign that

you need extra

ventilation.

J: When the FUEL

indicator has appeard,

the information display

will show the number of

minutes of fuel left in

the tank.

I: When the SAVE

unction is activated, the

heater will automatically

witch on or off in order

to remain within a

pecified temperature

range.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zibro SRE 149TC Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zibro SRE 149TC

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info