644523
23
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
23
tor should be in the working area
when the working area is very dan-
gerous.
During working and parking you have
to take care of the stability of the
machine to avoid dangers.
2.5 Maintenance
A TT ENT IO N
No cleaning, upkeep, checks or main-
tenance when machine is running
Be safe: Shut off the machine, let it cool
down, disconnect spark plug cap from
spark plug.
The machine does not require intense mainten-
ance. However, to ensure a long lifespan, we
strongly recommend following the upkeep and
maintenance plan.
Repairs must be carried out by specialists! Use
original ZIPPER parts only!
2.5.1 Upkeep and maintenance plan
Controls for the maintenance of the machine
Controlling the fuel
level
Regularly prior to each
operation
Loose or lost screws
Regularly prior to each
operation
Damage of any parts
Regularly prior to each
operation
Function of the con-
trol system part
Regularly prior to each
operation
Controlling the oil
level
Regularly prior to each
operation
Cleaning the machine
Regularly after opera-
tion
Take care of oil or
fuel stains under the
machine!
Regularly prior to each
operation
Cleaning the spark
plug
Every 25 working
hours
Cleaning the air filter
Every 20-30 working
hours
Controlling the belt
Regularly prior to each
operation
2.5.2 Controlling the engine oil
Set the plate compactor after 10 hours
standing time on a safe, smooth ground.
Remove the dipstick (Fig. H) and wipe it
clean.
Launch the dipstick into the oil tank with-
out screwing. Pull out the dipstick again
and control the oil level on the dipstick.
When there’s too less oil in the tank (Fig.
J) you have to refill with recommended oil
(following list) till the edge of the tank.
The maximum tank capacity is 400 cc.
ATTENTION!
A low oil level causes damag-
es of the engine and contracts
the life time of your machine.
Guarantee demands are out of
the question at deficient
upkeep and maintenance
workings.
2.5.3 Changing the engine oil
The engine oil should be changed after
the first 20 operation hours and then
every 100 operation hours.
The oil is changed easier when it is warm
after operation.
For changing you can drain the old oil by
removing the oil filter cap and the screw
on the engine base.
Ensure that the crankcase is filled with
the recommended oil (see 2.5.2)
Recommended oil
Season
Temperature
Oil type
Summer
25°C or higher
SAE 10W-30
Spring/Autumn
25°C to 10°C
SAE 10W-
30/20
Winter
0° C or lower
SAE 10W- 10
23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

zipper-zi-rpe60

Suche zurücksetzen

  • Wo befindet sich die Öffnung zum Einfüllen des Oels für den Rüttler ZI RPE60 Eingereicht am 8-4-2019 16:32

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Zipper ZI-RPE60 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info