Bedienungsanleitung Zoofari ZTSD 36 B1 - IAN 104476 (Seite 6 von 32) (Deutsch, Englisch, Holländisch, Französisch, Schwedisch, Finnisch)

663405

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

- 3 -

Operation

The fur to be cut must be dry and clean. Brush the

fur through to remove any knots.

t 

3FNPWFUIFCMBEFHVBSE7 from the cutting

head 

t Place the required trimming guide (1 - 6)

with the prongs facing upwards on the cutting

head  and thereby press the ﬂap of the trim-

ming guide down ﬁrmly onto the lower metal

edge of the cutting head (see illustration).

t &OTVSFUIBUUIFUSJNNJOHHVJEFIBTQSPQFSMZ

engaged and is secured before starting to cut/

trim the fur.

Note:

It is advisable to ﬁrst trim a small area so as to test

the individual comb attachments. Start with a comb

attachment for long hair (1/2“

or 3/8“

)

and, if necessary, use a shorter one. The comb

attachments permit cutting lengths from 3 to 13 mm.

t 

Switch the appliance on by sliding the On/Oﬀ

switch UPUIFQPTJUJPOv0/i

t 4MPXMZSVOUIFBQQMJBODFUISPVHIUIFGVSBHBJOTU

the direction of hair growth. Hold the appliance

so that the trimming guide is as ﬂat as possible

against the animal.



In addition, with the adjustment switch



the

cutting length of the cutter head



can be

adjusted in steps(up to 2 mm) without having

to exchange the comb attachment. To do this,

slide the adjustment switch



backwards to

increase the cutting length in steps. With this the

cutting length of the respectively attached comb

attachment is also increased by up to 2 mm.

Slide the adjustment switch



forward again to

reduce the cutting length or to bring the comb

attachment back into its original position.



Through removal of the individual trimming

guide, i.e. using only the cutting head



itself,

you can cut clean contours.



After use, switch the appliance oﬀ by sliding the

On/Oﬀ switch



to the position „OFF“.

Cleaning and Care

Risk of electric shock!

Before cleaning, remove the plug from the mains

power socket.

/&7&3TVCNFSTFUIFBQQMJBODFJOXBUFSPSPUIFS

liquids.

t 5BLFUIFSFTQFDUJWFUSJNNJOHHVJEFJGmUUFEPé

t 

Using exclusively the cleaning brush 8, remove

the hairs from the cutting head 

. The cutting

head



may not be cleaned with water or

PUIFSMJRVJETFYDFQUNFEJDBMBMDPIPM

t 

If in regular use, the cutting head 

should be

oiled occasionally. For this, use the supplied

blade oil 9

t 3FNPWFFYDFTTPJMXJUIBESZDMPUI

t $MFBOUIFIPVTJOHXJUIBTPGUESZMJOUGSFFDMPUI

Store the appliance in a dry and dust free

location. When it is in storage, place the blade

guard

7

on the cutting head



Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zoofari ZTSD 36 B1 - IAN 104476 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info