Bedienungsanleitung Zoom 9010 (Seite 49 von 63) (Englisch)

666219

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

Real-time Modulation of

Effect

Parameters

The 9010 lets you control effect parameters in real

time by connected pedals and MlDl controllers.

Some of the applications include using a pedal to

increase or decrease the modulation depth of a

chorus effect, or sweeping the low pass frequency of

an equalizer program by moving a pitch bend wheel

on a synthesizer, or making the reverb time become

progressively longer when you play higher notes on a

MlDl keyboard.

Pedal Real-time Modulation

To use the pedal for effect modulation:

Select the effect parameter you wish to control

in the Edit mode.

EDlT

CHORUS

)PO1

Mod. Depth=

Here, for example, the Modulation Depth parame-

ter of the Chorus program has been selected.

Hold down the ALT key and press either

INPUT/FUNCTION key

to select the modula-

tion source (Pedal 1 or

2).

Alternate Functions

Up to two modulation sources can be set to control

one parameter. In Pedal Real-time Modulation,

selecting

MOD

1 assigns Pedal 1 to the parameter

and MOD

assigns Pedal

If Pedal 1 has been selected, the following display

will appear:

MOD1

Real

time Mod.

Press the DlAL key (the red

LED

will light) to

move the arrow to the parameter value. Use the

EDlT DlAL to change the value.

MOD

Real time Mod.

PEDAL1

)

O/O

The range of modulation sensitivity is from -10O0/0

to +10O0/0. Positive values allow you to increase

the effect's parameter value by depressing the

pedal; negative values decrease the parameter

value when the pedal is depressed. Pedal Real-

time Modulation is cancelled at 0%.

The following example demonstrates the relation-

ship of the sensitivity parameter to effect control.

When the delay time of a program is set to 100 ms

and the modulation sensitivity is set to 100%,

depressing the pedal all the way will increase the

delay time by 10O0/0, or to 200 ms. If the modula-

tion sensitivity is set to 5O0/0, the maximum pedal

setting will increase the $day time by 5O0/0, or

150 ms. Negative values decrease the effect

parameter value by the same amount, provided

there is allowance in the parameter for such a

decrease.

Pedal Real-time Modulation of the

effect

only

affects the parameter temporarily; the original

parameter settings remain and are recalled when

the effect program is selected again.

Press the

EXIT key to return operation to the Effect

Parameter mode. The parameters which have

been set for Real-time Modulation (either Pedal or

MIDI) will be indicated with an MI or

in the

lower left corner of the

LCD,

just in front

the

parameter number.

EDlT

CHORUS

MbP01

Mod.

Depth=

This display indicates the modulation sensitivity of

the source.

Note:

maximum of two parameters of a single

effect can be set for real time modulation; one by

pedal, the other by MIDI.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zoom 9010 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info