Bedienungsanleitung Zoom G2.1u (Seite 11 von 23) (Englisch)

629753

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

ZOOM G2.1u

Use of Expression Pedal/Foot Switch

The G2.1u lets you use the built-in expression pedal or an external expression pedal (FP01/FP02)

connected to the [CONTROL IN] jack to adjust the effect sound or the volume in real time during play.

Connecting an optional foot switch (FS01) to the [CONTROL IN] jack allows changing patches or setting

the tempo for the rhythm function.

Using the built-in

expression pedal

The built-in expression pedal on the top panel of

the G2.1u can function as a volume pedal or it can

be used to control an effect parameter in real time.

Which function is selected for the expression

pedal is stored for each patch individually.

For details on parameters that can be modified

with the expression pedal, see pages 27 – 33.

1. Select the patch for which you want

to use the expression pedal.

2. Set the Module selector to the

"CONTROL" position.

The G2.1u goes into edit mode.

3. Turn Parameter knob 1 to select one

of the following modulation targets

for the expression pedal (→ p. 34).

● oF

Pedal is inactive.

● VL

Volume

● WU, Wd, WH, WL

WAH/EFX module

● GU, Gd, GH, GL

DRIVE module

● MU, Md, MH, ML

MOD/SFX module

● dU, dd, dH, dL

DELAY module

● rU, rd, rH, rL

REVERB module

HINT

• The modulation target can also be selected by

using the [PEDAL ASSIGN] key (

→ p. 18). This

method is available both in edit mode and in play

mode.

•Which parameter changes when the expression

pedal is operated depends on the effect type

selected for the module. For details, see pages 27 –

33.

• The pattern in which the parameter changes when

the expression pedal is operated can be selected in

edit mode from four choices. For details, see page

34.

4. If necessary, store the patch.

The expression pedal setting is stored as part of

the patch.

5. Select the patch in play mode and

operate the expression pedal.

The selected function will be activated.

When the G2.1u is in the bypass condition, the

expression pedal always functions as a volume

pedal, regardless of the setting made in step 3.

Use of Expression Pedal/Foot Switch

ZOOM G2.1u

Adjusting the sensitivity of

the built-in expression pedal

The expression pedal of the G2.1u is adjusted for

optimum operation at the factory, but sometimes,

readjustment may be necessary. If the sound does

not change when the pedal is fully pushed down,

or if it changes excessively even if the pedal is

only lightly pushed, adjust the pedal as follows.

1. Turn power to the G2.1u on while

keeping the [PEDAL ASSIGN] key

depressed.

The indication "dn" appears on the display.

2. With the expression pedal fully raised,

press the [STORE] key.

The display indication changes to "UP".

3. Push the expression pedal fully down

and then lift your foot off the pedal.

4. Press the [STORE] key once more.

The expression pedal adjustment is completed,

and the unit returns to the play mode.

HINT

• The point where the module is switched on or off

when the pedal is depressed is always the same,

regardless of the action taken in step 3.

• If "Er" appears on the display, repeat the procedure

from step 2.

Using an external

expression pedal (FP01/

FP02)

When you connect an optional expression pedal

(FP01/FP02) to the [CONTROL IN] jack of the

G2.1u, you can use that pedal as a volume pedal,

separately from the built-in expression pedal.

1. Plug the cable from the external

expression pedal into the [CONTROL

IN] jack, and then turn the G2.1u on.

2. Operate the external expression

pedal in play mode or edit mode.

The volume changes.

HINT

The external expression pedal always functions as a

volume pedal.

Using a foot switch (FS01)

Connecting an optional foot switch (FS01) to the

[CONTROL IN] jack of the G2.1u allows bank

switching in play mode. It is also possible to

switch bypass/mute on and off, control the tap

tempo function, or perform other functions with

the foot switch.

1. Plug the cable from the FS01 into the

[CONTROL IN] jack, and then turn the

G2.1u on.

Push strongly,

so that pedal touches

here.

When foot is lifted,

pedal returns slightly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zoom G2.1u Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info