533773
25
Zoom out
Zoom in
Vorherige Seite
1/152
Nächste Seite
Raise the MASTER fader to the 0 (dB) position.
Press the PLAY [
R
] button to play back the song,
and use the faders of each channel (DRUM, BASS,
1 6, 7/8, 9/10) to adjust the volume balance.
The drum sound and bass sound of the rhythm section are
assigned to the DRUM and BASS channels respectively,
and recorder tracks 1 – 6, 7/8, 9/10 are assigned to mixer
channels 1 – 6, 7/8, and 9/10 respectively. Use the
DRUM/BASS faders to adjust the volume of the rhythm
section, and faders 1 – 6, 7/8, and 9/10 to adjust the volume
of each track of the recorder section.
The level meter (DRUM, BASS, 1 – 6, 7/8, 9/10) located in
the center of the display indicates the post-fader signal
level of each channel. The L/R level meter indicates the
level of the signal that has passed through the MASTER
fader. Adjust the mix, being careful that the 0 (dB) dot of
each level meter does not light.
If necessary, you can also make the level meters show the
pre-fader signal levels (p.54).
In the main screen, press the [PAN] key of the
TRACK PARAMETER section.
When you press one of the keys of the TRACK
PARAMETER section, the track parameter menu will
appear, allowing you to set parameters such as pan and EQ
for each channel. If you press the [PAN] key, a screen will
appear in which you can adjust the Pan setting.
Press the status key of the channel whose pan you
want to adjust.
When the track parameter menu is displayed, you can press
a status key (or the cursor [
E
]/[
R
] keys) to select the
channel whose parameter you want to adjust.
Turn the dial to adjust the pan value.
The pan value can be adjusted in a range of L100 (far left)
– 0 (center) – R100 (far right).
Repeat steps 5 6 to adjust the pan of other
channels.
For the stereo channels (the DRUM channel, channels 7/8
and 9/10), the PAN parameter functions as a BALANCE
parameter that adjusts the volume balance between the
L/R channels.
Press the [EQ HIGH] key or [EQ LOW] key.
Press the [EQ HIGH] key to adjust the high-frequency
equalizer, or press the [EQ LOW] to adjust the low-
frequency equalizer. The following illustration shows the
8
Adjust the EQ
NOTE
7
6
Pan value
2
5
4
Adjust the pan
HINT
Track 9/10
Track 7/8
Track 6
Track 5
Track 4
Track 3
Track 2
Track 1
MASTER
DRUM
Bass
sound
Drum
sound
BASS
1234567/89/10
Recorder section
Rhythm section
3
2
ZOOM MRS-1044
25
Introductory tour
Step 4: Mixdown
25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Zoom MRS-1044 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Zoom MRS-1044

Zoom MRS-1044 Bedienungsanleitung - Deutsch - 120 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info