Bedienungsanleitung Zoom MRS-1608 (Seite 46 von 224) (Englisch)

533776

Zoom out

Zoom in

Vorherige Seite

1/224

Nächste Seite

Reference [Recorder]

ZOOM MRS-1608

When pressed, a key lights up, and the corresponding

input is active.

While the instruments are played, adjust

the [INPUT] controls to obtain a suitable

input sensitivity level.

When using the GUITAR/BASS INPUT jacks 1/2,

perform the adjustment with the [GUITAR/BASS

INPUT] control 1/2 on the front panel.

To use an insert effect, press the [INPUT

SOURCE] key in the effect section, and

press the [ON/OFF] key for the input to

which you want to apply the effect.

The respective [ON/OFF] key lights up orange, and the

insert effect is applied. When 8x COMP EQ is selected as

algorithm for the insert effect, all channels can be

processed by the effect. Otherwise, two selected channels

can be effect-processed.

HINT

In the default condition of a project, a patch suitable for

guitar/bass playing is selected as insert effect. If necessary,

select a different patch (

→

p. 139).

While the instruments are played, use the

[REC LEVEL] control to adjust the

recording level.

Set the recording level as high as possible, but avoid

settings that cause the [CLIP] indicator to light. The

current signal level can be checked with the level meters

IN1 – IN8.

Repeatedly press the status keys for the

tracks (1 – 8) to be recorded so that the

keys are lit in red.

Up to eight status keys can be activated simultaneously.

When a track is switched to the recording standby

condition, the signal from the input mixer will be sent to

the corresponding recording track.

If the [ON/OFF] key for a track is ON but the corresponding

status key is lit green (or is off), the respective input will not

be recorded.

Move to the start point of the recorder, and

start recording.

When recording is ﬁnished, stop the recorder.

To cancel the 8-track recording condition,

press the [8TRACK RECORDING] key.

The key goes out.

This function lets you set marks at any recorder position,

and return to the mark using a simple operation. Up to

100 marks can be set.

HINT

• It is also possible to switch mixer settings or effect setting

groups (scenes) at a marked position (

→

p. 84).

• When creating an audio CD, marks can be used to provide

index information. This will allow the CD player to access

speciﬁc points within tracks (

→

p. 155).

Setting a mark

Here’s how to assign a mark at the desired location in a

song.

Locate the point to which you want to

assign a mark.

HINT

•A mark can be assigned either during playback or when

stopped.

•You can use the scrub function (

→

p. 38) to locate the

position with high precision.

Press the [MARK] key in the control

section.

A mark will be assigned to the current location. The mark

number will appear in the MARKER ﬁeld of the counter.

The MARKER ﬁeld shows the number of the mark at the

current position or the closest preceding mark. When the

current position matches the mark, a marker symbol

appears to the right of the mark number.

Marker function

Mark number

Marker symbol

307

0 01

1608E.book 46 ページ２００４年４月１９日　月曜日　午前１０時４４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zoom MRS-1608 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zoom MRS-1608

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info