5.
If necessary, specify the track
number and V-take number, and
press the [ENTER/YES] key.
Use the left/right [PARAMETER/VALUE]
keys to move the flashing section, and use the
up/down [PARAMETER/VALUE] keys to
change the number. You can also specify a V-
take that is currently not selected for the
track.
When you press the [ENTER/YES] key, the
exchange destination track number/V-take
number are shown.
6.
Use the [PARAMETER/VALUE]
keys to specify the exchange
destination track and V-take.
7.
Press the [ENTER/YES] key.
The display changes as follows.
8.
To execute the exchange process,
press the [ENTER/YES] key.
While exchange is in progress, the remaining
time is shown on the display as a percentage,
such as "doinG90". When the copy is
complete, the V-take selection screen is
shown.
By pressing the [EXIT/NO] key instead of
the [ENTER/YES] key, you can return to the
display of the preceding step and make
changes.
Reference [Track Editing]
ZOOM MRS-4
45
5.
If necessary, specify the track
number and V-take number, and
press the [ENTER/YES] key.
Use the left/right [PARAMETER/VALUE]
keys to move the flashing section, and use the
up/down [PARAMETER/VALUE] keys to
change the number. You can also specify a V-
take that is currently not selected for the
track.
When you press the [ENTER/YES] key, the
display changes as follows.
6.
To execute the erase process,
press the [ENTER/YES] key.
While erasing is in progress, the remaining
time is shown on the display as a percentage,
such as "doinG90". When the copy is
complete, the "tr Edit" screen returns.
The length of the processing interval depends on
setting conditions.
By pressing the [EXIT/NO] key instead of
the [ENTER/YES] key, you can return to the
display of the preceding step and make
changes.
Exchanging the data of
entire tracks
You can exchange the recorded data of two
specified tracks.
1.
While the main screen is shown,
press the [TRACK PARAMETER]
key.
The track parameter menu appears.
2.
Use the status keys 1 – 4 to select
the exchange source track. Then
use the left/right [PARAMETER/
VALUE] keys to call up the screen
for selecting the V-take.
The track number and V-take number are
shown.
3.
Press the [ENTER/YES] key.
The display changes as follows.
4.
Press the right [PARAMETER/
VALUE] key two times to bring up
the indication "CHAnGE" on the
display. Then press the [ENTER/
YES] key.
The track number and V-take number to be
used as exchange source are shown. (In the
initial condition, this is the V-take currently
set for the track selected in step 2.)
