Bedienungsanleitung Zoom MRS-8 (Seite 97 von 148) (Englisch)

533781

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

Reference [Effects]

ZOOM MRS-8

For effect modules which comprise multiple effect types,

the name of the currently selected effect type is shown on

the second line of the display. When you turn the dial in

this condition, the effect type changes.

HINT

• If the contents of a patch have been changed, the “EDIT”

indicator in the upper part of the display will change to

“EDITED”. When the setting is returned to the original

condition, the indicator reverts to “EDIT”.

•To edit the ZNR module, bring up the indication “TOTAL” on

the ﬁrst line of the display, and then press the cursor down key

to call up the parameter.

Use the cursor up/down keys to select the

effect parameter to edit.

The displayed parameter will be different, depending on

the effect module and effect type.

The following illustration shows what appears on the

display when you have selected the DEPTH parameter of

the “FLANGER” effect.

HINT

When the ﬁrst line of the display shows “TOTAL”, the cursor

up/down keys can be used to select the ZNR module and the

patch level.

Turn the dial to change the setting value.

For details on the effect types that can be selected for each

effect module and on the effect parameters of each type,

refer to the information in the appendix of this manual.

To toggle the effect module on or off, bring

up an effect type or parameter for the

module, and then press the [ENTER] key.

The effect module is turned off. The module name or the

effect type is shown on the ﬁrst line and the indication

“-OFF-” on the second line of the display. Pressing the

[ENTER] key once more in this condition turns the

module on again.

NOTE

The modules included in TOTAL cannot be turned off.

To compare the sound of the currently

edited patch before and after editing, press

the [INSERT EFFECT] key.

Pressing the [INSERT EFFECT] key during editing

activates the compare function. While the compare

function is active, the display changes as follows and the

patch reverts to the last stored condition.

To return to the edited patch, press the [INSERT

EFFECT] key once more, or press the [EXIT] key.

10.

Repeat steps 4 – 8 as necessary to edit

other modules.

11.

To adjust the patch level (the ﬁnal volume of

the patch), use the cursor left/right keys to

bring up the indication “TOTAL PAT LVL” on

the display, and turn the dial.

The patch level can be adjusted in the range from 1 to 30.

12.

When you have ﬁnished editing, press the

[EXIT] key repeatedly to return to the main

screen.

NOTE

Keep in mind that if you select another patch without ﬁrst

storing the edited patch, the changes will be lost. For

information on how to store a patch, refer to the next section.

MOD/DLY

FLANGER

Effect type name

FLANGER

DEPTH

Effect parameter Setting value

FLANGER

-OFF-

COMPARE

Standard

TOTAL

PAT LVL

MRS-8(E).book 97 ページ２００４年７月３０日　金曜日　午後５時２４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zoom MRS-8 Seite 97

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zoom MRS-8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info