Bedienungsanleitung Zoom MRS-8 (Seite 101 von 148) (Englisch)

533781

101

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

Reference [Effects]

ZOOM MRS-8

101

Turn the dial to switch the effect type.

When the effect type is changed, the effect parameters

will also change accordingly.

HINT

• If the contents of a patch have been changed, the “EDIT”

indicator in the upper part of the display will change to

“EDITED”. When the setting is returned to the original

condition, the indicator reverts to “EDIT”.

• By pressing the [ENTER] key during editing, you can

temporarily turn the effect off, which is convenient during

parameter adjustment. To turn the effect back on, press the

[ENTER] key once more.

Use the cursor up/down keys to select the

effect parameter to edit.

The ﬁrst line of the display shows the effect type, and the

second line shows the name and current value of the

effect parameter.

HINT

To change the effect type, press the cursor up key repeatedly

to bring up the indication of step 3, and then turn the dial.

Turn the dial to change the setting.

For details on the effect types and effect parameters for

the send/return effect, refer to the appendix at the end of

this manual.

To compare the sound of the currently

edited patch before and after editing, press

the [SEND/RETURN] key.

Pressing the [SEND/RETURN] key during editing

activates the compare function.

While the compare function is active, the display changes

as follows and the patch reverts to the last stored

condition.

To return to the edited patch, press the [SEND/RETURN]

key once more, or press the [EXIT] key.

Repeat steps 5 – 6 as necessary to edit

other effect parameters.

When you have ﬁnished editing, press the

[EXIT] key.

The send/return effect patch selection screen appears

again.

NOTE

Keep in mind that if you select another patch without ﬁrst

storing the edited patch, the changes will be lost. For

information on how to store a patch, refer to the next section.

A patch that you have edited can be stored in any location

of the send/return effect. By storing an existing patch in

another location, you can create a copy of that patch.

Interchanging the position of patches (swapping) is also

possible.

From the send/return effect patch selection

screen or edit screen, press the

[FUNCTION] key.

The currently selected patch goes into store standby

mode. In this condition, you can select whether to

perform store or swap.

Use the cursor left/right keys to bring up

the indication “STORE TO” or “SWAP TO”.

Turn the dial to select the number of the

patch to store/swap.

When carrying out store, the current patch settings will be

stored under this number.

When carrying out swap, the currently selected patch and

the patch settings selected here will be interchanged.

HALL

PRE DLY

Effect parameter Setting value

COMPARE

VoChorus

Storing or swapping send/

return effect patches

STORE TO

VoChorus

Patch numbe

MRS-8(E).book 101 ページ２００４年７月３０日　金曜日　午後５時２４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zoom MRS-8 Seite 101

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zoom MRS-8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info