Bedienungsanleitung Zoom MRS-8 (Seite 105 von 148) (Englisch)

533781

105

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

Reference [Projects]

ZOOM MRS-8

105

• PROJECT NAME

Edit the name of the currently loaded project.

• PROJECT PROTECT

Switch the protection status of the currently loaded

project on or off.

• PROJECT SEQ PLAY

Continuously play the master tracks from several projects

saved on the SD card (sequence play).

HINT

For details on the sequence play function, see page 111.

Press the [ENTER] key to execute the

operation (or change the setting) that you

selected.

For details on the procedure, refer to the sections that

follow.

To return to the main screen, press the

[EXIT] key repeatedly.

Depending on which selection was made in step 3, the

main screen may return automatically.

You can select a project that was saved on the SD card,

and load it.

HINT

When power to the MRS-8 is turned on, the project that was

last worked on will be loaded automatically.

Refer to steps 1 – 3 of “Basic procedure” to

bring up the indication “PROJECT

SELECT” on the display. Then press the

[ENTER] key.

The name and number of the project to be loaded are

shown on the display.

Turn the dial to select the desired project.

Press the [ENTER] key to load the project.

When loading is completed, the unit returns to the main

screen. By pressing the [EXIT] key instead of the

[ENTER] key, you can cancel the operation and back up

one step at a time.

This operation creates a new project on the SD card.

Refer to steps 1 – 3 of “Basic procedure” to

bring up the indication “PROJECT NEW” on

the display. Then press the [ENTER] key.

The name and number of the project to create are shown

on the display.

The number of the newly created project is assigned

automatically, choosing the lowest free project number,

and a default name of “PRJxxx” (where xxx is the project

number) will be assigned.

The project name is shown with a cursor on the ﬁrst

character. This indicates that you can change the project

name.

If necessary, edit the project name.

To edit the name, use the cursor left/right keys and the

dial or the pads and keys in the rhythm section to input a

character. For details on entering characters, see page 33.

To create the project, press the [ENTER]

key.

The newly created project is loaded automatically, and

the unit returns to the main screen.

By pressing the [EXIT] key instead of the [ENTER] key,

you can cancel the operation and back up one step at a

time.

HINT

• The project name can also be edited later (

→

p. 107).

• If the recorder is stopped and the main screen is shown, you

can call up the screen of step 1 simply by pressing the [NEW

PROJECT] key.

Loading a project

PRJ SEL

PRJ000

Project name Project number

Creating a new project

PRJNo001

PRJ001

Project number

Project name

MRS-8(E).book 105 ページ２００４年７月３０日　金曜日　午後５時２４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zoom MRS-8 Seite 105

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zoom MRS-8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info