Bedienungsanleitung Zoom MRS-8 (Seite 109 von 148) (Englisch)

533781

109

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

Reference [MIDI]

ZOOM MRS-8

109

of the song).

• COMMAND

Turn Start/Stop/Continue message transmission on/off.

• MTC

Turn MIDI Time Code transmission on/off.

NOTE

Control Change transmission is always enabled, except

when the drum kit/bass program send channel is set to off.

Press the [ENTER] key to display the

setting of the selected item, and turn the

dial to change the setting.

For details on each item, refer to the following

explanation.

When you have ﬁnished making settings,

press the [EXIT] key repeatedly to return to

the main screen.

You can specify the MIDI channels for the drum track

and bass program.

Refer to steps 1 – 3 of “Basic procedure” to bring up the

indication “MIDI DRUM CH” or “MIDI BASS CH” on

the display. Then turn the dial to select one of the

following settings.

•1 – 16CH

Select one of MIDI channels 1 – 16 (default: DRUM

CH=10CH, BASS CH=9CH)

• OFF

Channel messages (Note On/Off, Control Change etc.)

for the drum kit or bass program will not be sent.

If you specify a MIDI channel (1 – 16), hitting a pad of

the MRS-8 or playing back a rhythm pattern or rhythm

song will cause the drum/bass track playing information

to be transmitted as Note On/Off messages in the selected

channel.

HINT

By selecting the same channel for the drum kit and bass

program, the playing information can be sent together on a

single channel via the MIDI OUT connector.

This setting speciﬁes whether the MIDI synchronization

message Timing Clock will be transmitted.

Refer to steps 1 – 3 of “Basic procedure” to bring up the

indication “MIDI CLOCK” on the display. Then press the

[ENTER] key and turn the dial to select one of the

following settings.

• ON (Transmission on)

Timing Clock information will be transmitted when the

MRS-8 is running (default setting).

• OFF (Transmission off)

Timing Clock information will not be transmitted.

The Timing Clock information is derived by dividing a

quarter note by 24. When Timing Clock is on, the clock

signal will calculated based on the tempo of the rhythm

pattern/rhythm song that is playing.

In order for the external MIDI device to play back in

synchronization at an appropriate tempo, you will need to

specify the tempo of the rhythm pattern/rhythm song at

the MRS-8. To synchronize the measure indication at the

MRS-8 and the MIDI device, the time signature setting at

both devices must be matched.

NOTE

Timing Clock information will be transmitted even if the

drum/bass track is muted.

HINT

• When using MIDI Timing Clock messages transmitted from

the MRS-8 to synchronize the transport locate operation at

the external MIDI device, you should also turn on transmission

for Song Position Pointer and Start/Stop/Continue messages

in addition to Timing Clock.

• If you transmit Timing Clock together with Note On/Off or

MTC information from the MRS-8, synchronization may

become unstable. When transmitting Timing Clock,

transmission of these messages should be turned off.

Setting the drum kit/bass

program MIDI channel

DRUM CH

10CH

Turning Timing Clock

messages on or off

CLOCK

MRS-8(E).book 109 ページ２００４年７月３０日　金曜日　午後５時２４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zoom MRS-8 Seite 109

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zoom MRS-8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info