Bedienungsanleitung Zoom MRS-8 (Seite 121 von 148) (Englisch)

533781

121

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

Troubleshooting

ZOOM MRS-8

121

■

The recorded sound is distorted

• Check whether the input sensitivity setting and

record level setting are appropriate.

• When the insert effect is applied to the input, check

whether the effect output level (patch level) setting

is appropriate.

Problems with effects

■

Insert effect does not work

• Make sure that the [INSERT EFFECT] key is lit.

• Check whether the insert effect position has been

selected correctly.

■

Send/return effect does not work

• Make sure that the [SEND/RETURN] key is lit.

• Make sure that the send level for the track is raised

(

→

p. 28).

Problems with the rhythm

section

■

Cannot hear the rhythm pattern playback

• Press the [DRUM/BASS] key repeatedly to select

the desired sound (drum kit/bass program), and then

operate the [RHYTHM] fader.

• Press the [DRUM/BASS] key repeatedly to select

the desired sound (drum kit/bass program), and then

press the [RHYTHM] status key repeatedly until the

key is lit in green.

• If the drum/bass sequence level has been set to zero

within a pattern, that sound will not be heard. Raise

the level setting for the drum/bass sequence (

→

74).

■

Cannot hear the rhythm song playback

• Make sure that you have not selected an empty

rhythm song (

→

p. 76).

• Make sure that the selected rhythm song does not

include an event with a volume level zero setting

(

→

p. 83).

■

No sound when you tap the pads

If the pad sensitivity has been set to “SOFT”, loud

sounds will not be produced even when you tap the

pad strongly. Change the pad sensitivity setting

(

→

p. 90).

■

Cannot create a new rhythm pattern/

rhythm song

If the display indicates “SEQ FULL”, the rhythm

section memory has been used to maximum capacity.

Delete unneeded rhythm patterns or songs to free up

memory.

■

Notes recorded in the rhythm pattern do

not play

Notes that exceed the maximum polyphony (6 sounds for

drum kit, 1 sound for bass program) will not be played.

Delete some of the notes that have been recorded to stay

within the maximum polyphony.

Problems with MIDI

■

Cannot synchronize with external MIDI

device

•

Make sure that the MIDI cable is correctly connected

from the MIDI OUT connector of the MRS-8 to the

MIDI IN connector of the external device.

• Synchronization with an external MIDI device is

only possible by using the MIDI clock or MTC

output from the MRS-8.

• Make sure that the external MIDI device is set to

receive MIDI clock or MTC and synchronize to it.

• When synchronizing on the timing clock, make sure

that output is enabled for Timing Clock, Song

Position Pointer, and Start/Stop/Continue messages

at the MRS-8 (

→

p. 110).

MRS-8(E).book 121 ページ２００４年７月３０日　金曜日　午後５時２４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zoom MRS-8 Seite 121

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zoom MRS-8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info