Bedienungsanleitung Zoom MRS-802 (Seite 75 von 184) (Englisch)

533782

Zoom out

Zoom in

Vorherige Seite

1/184

Nächste Seite

Reference [Mixer]

ZOOM MRS-802

Repeat step 4 as necessary to complete the new

name.

To carry out the store process, press the [STORE]

key or the [ENTER] key.

The current mixer and effect settings will be saved as a

scene. When the process is completed, the unit returns to the

screen of step 2. If you wish to cancel the process, you can

press the [EXIT] key to return to the previous screen.

Press the [EXIT] key to return to the main screen.

Recalling a saved scene

This section explains how to recall a scene that was saved to

memory.

Press the [SCENE] key in the control section.

The right side of the display indicates the scene number that

will be recalled.

Turn the dial to select the scene to recall.

To recall the selected scene, press the [ENTER]

key. If you wish to cancel the process, press the

[EXIT] key.

If you press the [ENTER] key, the scene is recalled and the

unit returns to the condition of step 1. If you press the

[EXIT] key, the unit returns to the main screen.

By pressing the [EDIT] key after selecting a scene, you can

edit the name of the scene.

Switching scenes automatically

By assigning a scene to a mark (→ p. 42) that was placed at

a desired location in the song, you can cause scenes to

switch automatically. This is convenient when you want to

change the mix or the effect settings as the song progresses.

Move to the point in the song where you want to

change the mix, and press the [MARK] key in the

control section.

A mark is entered at this point. Repeat this step to enter

marks at all other points where you want to change the mix.

Save the mix to be used at the start of the song as

well as all other mix settings as scenes.

When creating a mix for a speciﬁc range, using functions

such as the marker function to locate points (→ p. 43) and

the A-B repeat function (→ p. 44) is convenient.

Verify that the recorder is stopped, and press the

ZERO [

] key in the transport section to return to

the beginning of the song.

The beginning of the song (counter zero location) already

contains the mark number zero. First you will assign the

starting scene to this mark.

Press the [MARK] key.

When you press the [MARK] key at a location where a mark

has been assigned, a screen will appear in which you can

assign a scene to the corresponding mark.

HINT

• If you press the [MARK] key at a location where a mark has

not yet been assigned, a new mark will be assigned to that

location.

• If a dot is shown at the lower right of the mark number, this

means that the mark matches the current location.

Turn the dial to select the number of the scene you

want to assign to this mark, and press the [ENTER]

key.

The scene will be assigned to the mark. The following

screen shows an example of scene number 1 being assigned

to mark number 0.

Scene number

MARK ED

SCENE

Scene numbe

MARK ED

SCENE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zoom MRS-802 Seite 75

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zoom MRS-802

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info