Bedienungsanleitung Zoom MRS-802 (Seite 81 von 184) (Englisch)

533782

Zoom out

Zoom in

Vorherige Seite

1/184

Nächste Seite

Reference [Rhythm]

ZOOM MRS-802

Inputting rhythm pattern data

This section explains how to input rhythm pattern data into

an empty rhythm song in the desired playback order. The

following two input methods are available.

• Step input

With this method, you create rhythm patterns one by one by

specifying a pattern number and number of measures. Input

can be performed at any point in the song. It is also possible

to switch to another rhythm pattern while the previous

rhythm pattern is still playing. This method is suitable for

specifying patterns in detail.

•FAST (Formula Assisted Song Translator)

This method uses simple formulas to specify rhythm pattern

playback from start to end. The result is written to the

rhythm song in a single operation. This method is suitable

for mechanical input using a score and for frequently

repeated rhythm patterns. Input midway through a song is

not possible with this method.

Steps for the two methods are described below.

Step input

With this method, you specify the pattern number and

number of measures to enter patterns one by one.

In rhythm song mode ([SONG/PATTERN] key lit),

press the [DRUM] key so that it is lit.

For rhythm pattern input and editing, the [DRUM] key must

be lit, indicating that the rhythm section is separated from

the recorder section.

Press the REC [

] key.

The key lights up and rhythm pattern number as well as

other information can be input. The display changes as

follows.

During rhythm song step input, the ﬁrst line of the display

shows the currently selected item, and the second line the

setting value of that item. Because an empty rhythm song

does not yet contain any information, the second line of the

display indicates “EOS” (End Of Song) to show the end of

the rhythm song.

Use the cursor up/down keys to bring up the

indication “ PTN” on the ﬁrst line of the display.

During step input, the cursor up/down keys are used to select

an item, and the cursor left/right keys to move the current

position. The following items can be selected with the cursor

up/down keys.

HINT

When an item other than “EV→” is selected and no

information is input for the current position, the arrow “ ”

is shown before the item name (for example: “ PTN”). This

indicates that information input at a preceding point is still

valid.

Normally, when “PTN” is selected, the ﬁrst line of the

display shows the number of the pattern input for the current

point, and the second line shows the pattern name. Because

an empty rhythm song does not yet contain any information,

the ﬁrst line of the display shows “ PTN” and the second

line is blank.

Press the [INSERT/COPY] key to bring up the

indication “INSERT?”

When “INSERT?” is displayed, new rhythm pattern data can

be input at the current location.

EOS

Tick

Beat

Measure

PTN

EOS

001 1 0

PTN

TimSig

Tempo

DrVOL

Event information at current point

Rhythm pattern

Beat

Drum kit volume

Tempo

Description Parameter

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zoom MRS-802 Seite 81

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zoom MRS-802

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info