Bedienungsanleitung Zoom MRS-802 (Seite 92 von 184) (Englisch)

533782

Zoom out

Zoom in

Vorherige Seite

1/184

Nächste Seite

Reference [Rhythm]

ZOOM MRS-802

To enter a note, hit the status key corresponding to

the note, and then press the PLAY [

] key.

The note is recorded, and the unit advances by one step,

corresponding to the quantize value set in step 4.

HINT

If you hit several status keys during input, multiple sounds

will be recorded at the same position.

To enter a rest, press only the PLAY [

] key.

If you press the PLAY [R] key by itself, the position

advances by one step (duration of quantize value) but no

play information is recorded.

To switch the drum sounds assigned to the status

keys 1 - 8, press the [SOLO] key and then turn the

dial to select the instrument bank number.

A combination of eight sounds assigned to the status keys is

called an "instrument bank". For one drum kit, you can use

up to three instrument banks. (For information on which

sounds are assigned to the status keys in the various banks,

see page 161.)

If you press the [SOLO] key while the [DRUM] key is lit,

the number of the currently selected instrument bank is

shown.

When you turn the dial to change the instrument bank

number, the drum sounds assigned to status keys 1 - 8 are

switched. To return to the original screen, press the [EXIT]

key.

HINT

• For most drum kits, instrument bank 1 contains the basic

drum sound. (The sound name is indicated by the letter

printed above the status keys 1 - 8.) When starting out with

an empty rhythm pattern, selecting this bank is

convenient.

• Depending on which drum kit is currently selected, the

sound type assigned to status keys 1 - 8 may be different.

Switch the drum kit if necessary (

→P. 79).

Repeat steps 5 - 7 while changing the step length

as necessary, to enter the desired rhythm pattern.

When you reach the end of the pattern, the unit

automatically returns to the ﬁrst measure, letting you enter

more instrument sounds.

To edit the recorded contents after step input,

proceed as follows.

•To erase the performance of a speciﬁc drum sound

When you advance the record position with the PLAY [R]

key, the status key that is input at the current position lights

up. By holding down the [DELETE/ERASE] key and

pressing the lit key, you can erase the sound of that key. The

key goes out, and the playing information is erased from the

rhythm pattern.

NOTE

• When searching for a note to erase, set the quantize value

to the same value as the smallest value used during

recording, or to a smaller value. Otherwise the start of a

note may be missed.

• Make sure that the sound to be erased is part of the

currently selected instrument bank.

10.

When you have ﬁnished step input, press the STOP

[

] key.

The unit returns to the rhythm pattern screen. Press the

PLAY [

R] key to hear the pattern that you recorded.

11.

To terminate pattern recording and return to the

main screen, press the [EXIT] key.

Q=4

001 2 0

Q=4

001 3 0

Bank number

INSTRMNT

BANK=

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zoom MRS-802 Seite 92

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zoom MRS-802

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info