Bedienungsanleitung Zoom MRS-802 (Seite 111 von 184) (Englisch)

533782

111

Zoom out

Zoom in

Vorherige Seite

1/184

Nächste Seite

Reference [Creating a CD]

ZOOM MRS-802

111

Writing audio data

The MRS-802 lets you write the contents of the master track

of any project to a CD-R/RW disc in CD-DA (audio data)

format. The result is an audio CD that can be played in a CD

player. As with the other tracks of the MRS-802, the master

track also has ten V-takes. The most recently selected V-take

will be used as source material for the audio CD.

There are two ways of writing audio data on a CD-R/RW

disc, as described below.

•Writing by project

This method writes the master track of a single project to the

disc. When using this method, it is possible to add audio data

later, until the disc has been ﬁnalized.

•Writing by album

This method involves ﬁrst creating a list for the audio CD

(called an “album”) which contains information about

master tracks from various projects that are to be included.

The CD is then written in one operation, and ﬁnalizing is

automatically performed, so that no more audio data can be

added later.

HINT

“Finalizing” an audio CD refers to the procedure of making it

playable on an ordinary CD player. After it has been ﬁnalized,

no more data can be added to a CD-R/CD-RW disc.

NOTE

The waveform data of the currently selected V-take of the

master track are recorded as is on the audio CD. It is not

possible to edit it during recording. To cut off blank portions

before or after the audio material, use the master track

trimming function (→ p. 49) beforehand.

About CD-R/RW discs

For creating an audio CD, you can select either CD-R or

CD-RW discs as media. The features of the two disc types

are described below.

• CD-R

This media type allows only one-time recording or adding of

data. Once data have been written, they cannot be changed

or erased. CD-R discs are available in 650 MB and 700 MB

capacities.

To newly write audio data of the MRS-802 to disc, a blank

CD-R is required. As long as the disc has not been ﬁnalized,

it is possible to add further audio data up to the maximum

capacity of the disc. After being ﬁnalized, the disc can be

played on an ordinary CD player.

• CD-RW

This media type allows recording, adding, and bulk-erasing

of data. CD-RW discs are also available in 650 MB and 700

MB capacities.

To newly write audio data of the MRS-802 to disc, a blank

or completely erased CD-RW is required. As long as the disc

has not been ﬁnalized, it is possible to add audio data up to

the maximum capacity of the disc. The disc can usually only

be played on CD players designed to read CD-R/RW discs.

NOTE

When using commercially available pre-formatted CD-RW

discs, perform an erase operation ﬁrst, as described on page

117.

CD-R

Once only Yes No Yes

Yes Yes No

Many times

(after erasing)

CD-RW

Disc Write

Add

data

Erase

Playback on

normal CD player

Reference [Creating a CD]

This section describes how to use the CD-R/RW drive in the MRS-802.

NOTE

• On a MRS-802 without preinstalled CD-R/RW drive, creating a CD is not possible.

• Mixed mode CDs or copy controlled CDs cannot be played or used as data source.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zoom MRS-802 Seite 111

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zoom MRS-802

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info