Bedienungsanleitung Zoom MRS-802 (Seite 122 von 184) (Englisch)

533782

122

Zoom out

Zoom in

Vorherige Seite

1/184

Nächste Seite

Reference [Creating a CD]

ZOOM MRS-802

122

is ﬁnished, the display indication changes to “ALL SAVE

COMPLETE”.

NOTE

When a full backup spans several discs, restoring a single

project requires you to ﬁrst insert the disc on which it is

saved. Be sure to note the disc number and the projects

saved on the disc on the case and label of the disc.

HINT

When the disc has been ejected, it also possible to abort the

backup operation. To do this, press the [EXIT] key while the

indication “CHANGE DISCxxx” (where xxx is the disc

number) is shown. The indication will change to “ALL SAVE

CANCEL?”. Press the [ENTER] key to terminate the process.

To return to the main screen, press the [EXIT] key

several times.

Loading a project from CD-R/RW disc

To restore a project saved on CD-R/RW disc to the hard disk

of the MRS-802, proceed as follows.

From the main screen, press the [CD-R/RW] key in

the display section.

The CD-R/RW menu appears.

Use the cursor left/right keys to bring up the

indication “CD-R/RW BACKUP” on the display, and

press the [ENTER] key.

The display shows the backup/restore menu.

Use the cursor left/right keys to bring up the

indication “BACKUP LOAD” on the display, and

press the [ENTER] key.

The indication “LOAD InsDisc1” appears on the display.

Insert the CD-R or CD-RW where the project is

saved into the CD-R/RW drive.

• If project was backed up as single project

Insert disc number 1.

• If project was backed up as part of a full backup of all

projects

Insert the disc where the project is stored. (If there are

multiple discs, insert the ﬁrst disc that contains data of the

desired project.)

NOTE

• Also when you have backed up all projects in a single

operation, restore is performed for single projects.

• If the backup of the project spans multiple discs, be sure

to insert the ﬁrst disc that contains data of the desired

project ﬁrst. If you insert another disc, the project data will

not be read correctly.

Press the [ENTER] key.

The name of the project on the disc, and the number which is

to be assigned to the project are shown on the display.

HINT

When being restored to the MRS-802, an empty project

number is automatically assigned to the project. Even if a

project with the same name already exists on the hard disk,

it will not be overwritten.

To check the name of the directory from which the

project will be read, press the cursor down button.

The display shows the directory name.

Press the cursor up key to restore the original display.

BACKUP

SAVE

LOAD

InsDisc1

LOAD

PRJ012

Project number

to be assigned

Project name

DirName

PROJ012

Directory name

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zoom MRS-802 Seite 122

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zoom MRS-802

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info