Bedienungsanleitung Zoom MRS-802 (Seite 179 von 184) (Englisch)

533782

179

Zoom out

Zoom in

Vorherige Seite

1/184

Nächste Seite

ZOOM MRS-802 Ver 2.0

Creating a CD using the disc-at-once method

The MRS-802 Version 2.0 offers two ways of creating an

audio CD from an album. The track-at-once method

inserts blank gaps between tracks on an audio CD, while

the disc-at-once method writes tracks continuously

without gaps. Using disc-at-once, you can create a non-

stop disc or a disc of a live performance that allows

skipping by song units. For both methods, ﬁnalizing is

carried out automatically at the end, so adding material to

the CD later is not possible. The characteristics of track-

at-once and disc-at-once are described in detail below.

●

Track-at-once (TAO)

The master tracks of projects registered in the album

are written to the CD one by one, while inserting gaps

between them. When a CD written with track-at-once

is played on a CD player, a mute section of two seconds

follows each track. This method is suitable for creating

a regular music CD where each track is separated by

blanks.

●

Disc-at-once (DAO)

The master tracks of projects registered in the album are

written to the CD in a single operation without gaps.

When a CD written with disc-at-once is played on a CD

player, the disc plays through without interruption,

because the multiple tracks are joined seamlessly.

If necessary, you can use marks as PQ subcode

information (indicating track start/end points and other

information) to divide a single project into multiple

tracks for creating the audio CD. This is convenient to

make a CD of a continuous live performance where the

listener can still jump to specific songs.

HINT

If you burn the CD with disc-at-once, but still want to have

blanks between speciﬁc songs, you should add a blank

portion to the master track of each respective project.

Because the MRS-802 Version 2.0 lets you select

between track-at-once (TAO) and disc-at-once (DAO) for

writing the audio CD, the procedure for creating an audio

CD by album changes as follows.

HINT

You can include playlist information created with the

sequence play function in the album (

→

P.10).

NOTE

Before starting the procedure, use the trimming function on

the V-takes to be used as source material.

Insert a CD-R/RW disc into the integrated

CD-R/RW drive.

Use a blank CD-R/RW disc or a CD-RW disc that has

been completely erased.

Verify that the V-takes you want to use for

the audio CD are selected for the master

tracks of the projects.

From the main screen, press the [CD-R/

RW] key in the display section.

The CD-R/RW menu appears.

Verify that “CD-R/RW AUDIO CD” is shown

on the display and press the [ENTER] key.

The display indication changes as follows.

Use the cursor left/right keys to bring up

the indication “AUDIO CD ALBUM” on the

display, and press the [ENTER] key.

In this condition, you can select the write method.

About track-at-once and disc-at-

once

Creating an audio CD by album

AUDIO CD

BURN CD

ALBUM

TYPE:DAO

MRS802v2(E).fm 7 ページ２００４年５月２７日　木曜日　午後５時５９分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zoom MRS-802 Seite 179

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zoom MRS-802

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info