595925

ZTE AC30 Anleitung

1
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
Indicator Status Description
Battery
indication
RED glittering Please charge
RED bright Voltage of battery is low
Green glittering Charging
Green bright Voltage of battery is high
LED off No battery.
Signal
strength
indication
Red bright
ERROR or NO signal or NO
network service or NO SIM
GREEN glittering Signal is ok
Green bright Signal is good
LED off Low power mode
Wi-Fi
indication
LED off
WIFI is inactive or low power
mode
BLUE bright WPS is active
Blue bright Wi-Fi is active
Network
indication
RED glittering 2G Modem data transferring
RED bright Register on 2G network
GREEN glittering 3G Modem data transferring
GREEN bright Register on 3G network
LED off
ERROR or NO signal or NO
network service or NO SIM
Notes:
* The battery LED will be GREEN bright once the battery is fully
charged when power on.
* The battery LED will be turn off once the battery is fully charged
when power off.
1
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057 Tel: +86-755-26779999
URL: http://www.zte.com.cn E-mail: mobile@zte.com.cn
ZTE AC30
Quick Start Guide
2 4 5 6 73 8
LEGAL INFORMATION
Copyright © 2011 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated
or utilized in any form or by any means, electronic or mechanical,
including photocopying and microfilm, without the prior written
permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to
make modications on print errors or update specications without prior
notice.
Version No.: R1.0
Edition Time: July-2011
Manual No.: 079584503492
9
Introduction
ZTE AC30 is a 3G/2G mobile hotspot device, working in CDMA/1X/
EVDO network. The client devices could connect to it via USB or Wi-Fi
interface. The device supports data and SMS services, enabling you to
communicate anytime and anywhere.
This quick guide provides instructions on how to install and get started
with the product. For information about connection of services, please
consult your service provider.
Specication
Data Service
CDMA EVDO: DL 3.1 Mbps
UL 1.8 Mbps
Weight 80 g
Dimensions (W×H×D): 99.7 mm*53.7 mm*13.9 mm
Power Adapter +5V (DC), 0.7 A Max
Battery 1500 mAh
*Standby time 100 hours
*Working time 4 hours
Operate system
Windows 7, Windows Vista, Windows XP (SP2 or
later), MAC 10.4 or later
Web Browser
Windows 7, Windows Vista (64bit or 32bit),
Windows XP (SP2 and later), MAC (10.4 later)
Notes:
The device’s standby and working time are only for your reference, and
based on ideal working environment.
Switching On/Off Your Device
Press and hold the Power Key for three seconds to switch the device
on or off.
When you turn the device on, the signal icon is lit.
Charging Your Device
Notes:
• Charge at least 5 hours to ensure a full initial charge.
• Charging is only possible within a temperature range of 0°C to 45°C.
1. Connect the Mini USB end of the AC wall charger to the Mini USB
port on the device.
2. Plug the other end of the AC wall charger into the appropriate
electrical outlet.
Working Mode
Your device supports three working modes. For the client, we only use
PC or laptop as the example in this document.
USB Mode: Connect to the device with the USB cable.
Wi-Fi Mode: Connect to the device via Wi-Fi.
Mixed Mode: Connect to the device with the above two connection
methods.
Notes:
If you want to connect to the Internet by using Wi-Fi mode, make sure
that the client supports the Wi-Fi function.
The following picture is the application example. All of the client devices
can surf on the Internet at the same time.
Getting to Know Your Device
The following gure shows the appearance of the device, it is only for
your reference. The actual device may be different.
Interface and Buttons
1. Power
Hold the Power button to switch on/off the
device
2. Indicator It indicates your device’s status.
3. Charger/USB port
•
Charge your device
•
Connect the client to your device via USB
cable
Notes:
* Continuously press the Power button ve times within 5 seconds,
the device will restart automatically and restore to the factory
default settings.
LED Indicator
It indicates the status of your device.
Hardware Installation
Inserting (U)SIM Card and Battery
1. Use the thumb catch at the bottom of the device to open the battery
cover.
2. Insert (U)SIM Card into the slot.
Warning:
Please power off the device and remove the external power adapter
before removing or inserting the (U)SIM card, if not, the device or (U)SIM
card may be damaged.
3. Insert the battery as shown with the contacts located against the
gold springs.
4. Press the battery down ush into the case.
5. Once the battery is secure, place the battery cover back on the
device until it locks into place.
Establishing a Connection Between Your Device and the Client
Via USB Cable
1. Connect your device and the client with the USB cable.
2. Power on your device.
3. Follow the system prompts to complete the software installation:
Notes:
• If the system does not launch installation automatically, you can run
the installation program in path of My Computer > Mobile Hotspot
> AutoRun.exe.
• The driver of your device will be installed at the same time.
4. After the installation, the system will create a shortcut icon on
your desktop and a Mobile Hotspot program group in the Start
> Programs menu. The connection between your device and the
client will be established successfully a moment later.
Via Wi-Fi
1. Power on your device directly. It will take 1~2 minutes to initialize,
and then Wi-Fi LED is blinking.
2. Use your normal Wi-Fi application on the client to search the
available wireless network.
Notes:
You need to check your Wireless
Network Connection. Set the
client to obtain an IP address
automatically in the Internet
protocol (TCP/IP) properties, and
the client will get an IP address
like “192.168.0.100”.
3. Sele c t th e SSID of y o ur
d e v i c e , a n d th e n c l i c k
Connect.
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für ZTE AC30 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info