595925
2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
10 11 12 13 14 15 16 17 18
View the information of WAN, WLAN and Device. Input the case-
sensitive default password admin”, and then click Login to access the
WebGUI Conguration page.
Notes:
Do not put anything on the top of your device. Do not lay devices to
overlap each other when using.
The device takes 1~2 minutes to initialize, and attach to the
network.
PIN Code Verication
If the PIN code of your SIM card is enabled, you will need to input the
PIN code when you login at the rst time.
Notes:
The (U)SIM card will be locked if you enter wrong PIN code
consecutively for three times.
If you want to modify the PIN Status, please select Settings >
Advanced > PIN Manage to do the actions.
Quick Setup
After logging in, select Quick Setup, and then the Quick Setup wizard
appears.
The Quick Setup wizard guides you how to set the basic parameters
for your device in the safest way. After this procedure, you can use your
Internet service.
Notes:
The parameter settings may have been preset by your service provider,
and you will enjoy your Internet service directly. Please contact your
service provider for details if you want to do some modication.
WAN Connection
After logging in, select WAN Connection, and you can choose the
WAN Connection Mode according to your requirement.
Settings
After logging in, select Settings, and you can do the following
operations.
Select Settings >
Wi-Fi Settings
View the current station list, change the basic
wireless network settings, choose security mode
and WPA type
Select Settings >
3G Settings
View the 3G Wireless Information, select Band
Selection Mode or change APN Setting
Select Settings >
Firewall
Set the Mac/IP/Port Filtering, Port Forwarding or
the System Security conguration
Select Settings >
Advanced
View the current status of your device, change
the Administrator Settings, restore factory
defaults, manage PIN or set the LAN interface
conguration
Notes:
Make sure that you can remember the new password if you change the
login password by selecting Settings > Advanced > Management.
Please restore the device to the factory default settings in case you
forget the new password.
The use of electronic transmitting devices is forbidden in aircrafts,
at petrol stations and in hospitals. Please observe and obey all
warning signs and switch off your device in these conditions.
Do not touch the inner antenna area if not necessary. Otherwise it
will affect your device’s performance.
Store your device out of the reach of little children. Your device may
cause injury if used as a toy.
Do not touch the metallic parts of your device so as to avoid a burn,
when your device is working.
Using Your Device
Please use original accessories or accessories that are authorized.
Using any unauthorized accessories may affect your device’s
performance, and violate related national regulations about telecom
terminals.
Avoid using your device near or inside metallic structures or
establishments that can emit electromagnetic waves. Otherwise it
may inuence signal reception.
Your device is not waterproof. Please keep it dry and store in a
shady and cool place.
Do not use your device immediately after a sudden temperature
change. In such case, it will produce dew inside and outside your
device, so don’t use it until it becomes dry.
Handle your device carefully. Do not drop, bend or strike it.
Otherwise your device will be damaged.
No dismantling by non-professionals and only qualied technicians
can undertake repair work.
Operating temperature range of 0 °C ~ +35 °C and humidity range
of 5% ~ 95% are recommended.
Using Battery
Do not short-circuit the battery, as this can cause excessive heat
and re.
Do not store battery in hot areas or dispose of it in a re to avoid
explosion.
Do not disassemble or modify the battery.
When not using the battery for a long period, remove it from the
device and store it in a cool dry place.
Never use any charger or battery damaged or worn out.
Return the wear-out battery to the provider or put it in the appointed
recycle place. Do not put it in familial rubbish.
Warning:
If the battery is broken, keep away from it. If it taints your skin, wash
your skin with abundant fresh water and ask doctor help if necessary.
Limited Warranty
This warranty does not apply to defects or errors in the Product
caused by:
i. Reasonable abrasion.
ii. End User’s failure to follow ZTE’s installation, operation or
maintenance instructions or procedures.
iii. End Users mishandling, misuse, negligence, or improper
installation, disassembly, storage, servicing or operation of the
Product.
iv. Modifications or repairs not made by ZTE or a ZTE-certified
individual.
v. Power failures, surges, fire, flood, accidents, actions of third
parties or other events outside ZTE’s reasonable control.
vi. Usage of third-party products, or usage in conjunction with
third-party products provided that such defects are due to the
combined usage.
vii. Any other cause beyond the range of normal usage intended for
the Product.
End User shall have no right to reject or return the Product, or receive a
refund for the Product from ZTE under the above-mentioned situations.
Notes:
To protect your device from illegal use, there will be a pop-up
window to require the password. Please check the label on the
battery compartment of your device to gain the SSID and preset
password information.
You can change the password on Settings > Wi-Fi Settings >
Security > WPA Key, please remember the password you set.
4. Wait a moment, the connection between your device and the client
will be established successfully.
Accessing the Internet
1. Switch on the device.
2. Establish a connection between your device and the client.
3. After successfully establishing the connection, access the Internet
in the Always On, Manual or On Demand mode. The default mode
is Always On.
Notes:
You can browse the WebGUI Configuration page and click WAN
Connection to set the WAN connection mode.
Accessing the WebGUI Conguration Page
1. Make sure the connection between your device and the client is
correct.
2. Launch the internet browser and enter http://192.168.0.1 or http://
u.home in the address bar, or double click the Mobile Hotpot icon
on the desktop directly.
Notes:
It is recommended that you use IE (7.0 or later), Firefox (3.0 or later),
Opera (10.0 or later), Safari (4.0 or later) or Chrome (5.0 or later).
3. The login page appears as follows.
Disconnecting from the Internet
1. Lo g in th e WebGUI Configurati on pag e, and select WAN
Connection.
2. Select Manual > Disconnect Internet.
3. Click Apply.
Notes:
Turning off the device can also terminate the internet connection.
SMS
This function allows you to view, send and receive short messages.
After logging in, select SMS, and you can do the following operations.
Select SMS > Native Operate the SMS in your device
Select SMS > UIM Card Operate the SMS in your (U)SIM card
Select SMS > New Message Send or save SMS
Select SMS > SMS Settings Set the SMS conguration
PhoneBook
This function allows you to store contacts to your device or (U)SIM
card.
After logging in, select PhoneBook, and you can add a new contact by
clicking the Add New tab, and perform operations to the contacts in the
Native or (U)SIM Card tab.
Sleep Mode
When you active Wi-Fi function and use battery to support the device,
once no user connected to AC30 within 10 minutes, the device will
enter sleep mode
,
and all LEDs will be turned off. In sleep mode, the
Wi-Fi function will be closed, when the Power button is pressed, the
device will be awaken, and you should press the Power button again to
active Wi-Fi function.
Notes: You can only press the Power button to awake the device.
Warning and Notice
To the Owner
Some electronic devices are susceptible to electromagnetic
interference sent by your device if inadequately shielded, such as
the electronic system of vehicles. Please consult the manufacturer
of your device before using if necessary.
Operating your device may interfere with medical devices like
hearing aids and pacemakers. Please always keep them more than
20 centimeters away from such medical devices when they are
turned on. Turn your device off if necessary. Consult a physician or
the manufacturer of the medical device before using your device.
Be aware of the usage limitation when using your device at places
such as oil warehouses or chemical factories, where there are
explosive gases or explosive products being processed. Turn off
your device if required.
This warranty is End User’s sole remedy and ZTE’s sole liability
for defective or nonconforming items, and is in lieu of all other
warranties, expressed, implied or statutory, including but not
limited to the implied warranties of merchantability and tness for a
particular purpose, unless otherwise required under the mandatory
provisions of the law.
Limitation of Liability
ZTE shall not be liable for any loss of profits or indirect, special,
incidental or consequential damages resulting from or arising out of
or in connection with using of this product, whether or not ZTE had
been advised, knew or should have known of the possibility of such
damages, including, but not limited to lost profits, interruption of
business, cost of capital, cost of substitute facilities or product, or any
downtime cost.
How to Get Help
You can get Help by:
Sending E-mail to mobile@zte.com.cn
Visiting http://www.zte.com.cn
Calling Service Hotline: +86–755–26779999
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für ZTE AC30 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info