Bedienungsanleitung ZTE F-160 (Seite 4 von 28) (Englisch)

595959

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Getting Started

SIM and Memory Cards

Inserting the SIM (Subscriber

Identity Module) Card

You can obtain a SIM card from your service

provider when you sign on as a subscriber.

Caution:

• Do not bend or scratch your SIM card.

Keep the card away from electricity and

magnetism.

• Do not touch the metal surface of the SIM

card. Doing so could cause information on

the card to be lost or destroyed.

• Disconnect the charger and other

accessories from your phone and remove

the battery before inserting and removing

your SIM card.

1. Hold the Power/End Key to power off

the phone.

2. Remove the back cover and battery.

3. Hold the SIM card with the metal

contacts facing downward and the cut

corner at the bottom right. Insert the

card into the card holder and slide it

into position.

4. Replace the back cover on the back of

your phone.

Removing the SIM Card

1. Hold the Power/End Key to power off

the phone.

2. Remove the back cover and battery.

3. Gently remove the SIM card from the

card holder.

Inserting a Memory Card

The memory card gives your phone a very

large memory capacity. This allows you to

save multimedia data, including images,

photos, MP3 audio ﬁles, and ringtones.

You can also use this memory card to store

other ﬁles.

Tip: Your phone can support a memory card

with up to an 8GB capacity.

1. Hold the Power/End Key to power off

the phone.

2. Remove the back cover and battery.

3. Carefully insert the memory card into

the memory card slot and push it until it

clicks into position as shown below.

4. Reinsert the battery, replace the back

cover, and turn the phone on.

Caution: Only use approved memory cards

for this device. Any use of unapproved

memory cards might cause loss of data or

damage to your phone.

Removing a Memory Card

1. Hold the Power/End Key to power off

the phone.

2. Remove the back cover and battery.

3. Push the card inward so that it pops out.

4. Carefully remove the memory card.

5. Reinsert the battery, replace the back

cover, and turn the phone on.

Tips:

• Do not remove the memory card while

reading or writing to the card. Doing so

might corrupt the information on the card

or phone. If possible, insert and remove

the memory card while the phone is

turned off.

• If you want to format the memory card

on your PC, make sure you select the

FAT2 Formatting type. If this is not done,

the memory card might not be identiﬁed

by your phone.

Charging Your Phone

Your phone uses a rechargeable battery.

When you ﬁrst unpack the phone, the

battery is not fully charged, but there might

be enough power to turn on the phone. You

can use the provided charger to charge

the battery.

1. Open the USB port cover.

2. Insert the charger’s USB adapter into the

USB port.

3. Plug the charger into a standard AC

wall outlet.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ZTE F-160 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info