Bedienungsanleitung ZTE Z-431 (Seite 27 von 40) (Englisch)

596102

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

• Auto Keypad Lock: Conﬁgure your phone to lock the keypad when it is not in

use. You can select the time delay from the available choices. If you select Off,

the phone will not lock the keypad automatically.

• Main Menu Style: Set the main menu to be displayed as a list or a grid.

• Default Storage Location: Assign either the phone or the memory card as the

location where the phone will save downloaded ﬁles.

• TTY Setting: Toggle TTY functionality. Please refer to “TTY Mode” under

Accessibility in this manual for more information about this feature.

• T-coil Setting: Enables you to hear the phone’s audio through a hearing aid with

a telecoil. Please refer to “HAC Mode” under Accessibility in this manual for more

information about this feature.

• Phone Info: View technical information about your phone, including My Device

Number, Version Info, Icon Glossary and Operating System.

Proﬁles

A proﬁle is a set of conﬁgurations appropriate to a speciﬁc environment. Each

proﬁle allows you to set the ringtone volume/vibration, the earpiece volume, and

the warning tone.

From the home screen, select Main Menu > Settings > Proﬁles.

Select a proﬁle and press the Left Soft Key to edit that proﬁle.

• Voice Call Ringtone: Set the voice call ringtone.

• Ringtone Volume: Set the volume of the ringtone.

• Alert Type: Set the ring type (e.g. ring, vibrate and ring).

• Receiver Volume: Set the volume of the receiver.

• Message Tone: Set the notiﬁcation ringtone for an incoming SMS or

MMS message.

46 Settings

• Key Tone: Enable or disable keypad tones when dialing.

• Warning Tone: Turn the warning tone on or off.

• Power On/Off Tone: Turn on/off the sound that plays while powering on/off

the phone.

• Missed Calls Alert: Enable, disable, and set timing for the missed calls

audible notiﬁcation.

Call Settings

From the home screen, select Main Menu > Settings > Call Settings.

Earphone Auto Answer: You can conﬁgure the phone to answer incoming calls

automatically when an earphone is connected to the phone.

Any Key to Mute: This option allows you to silence the ringtone by pressing any key

when there is an incoming call.

Connection Reminder: When a call connects, you will hear a three-tone beep to

notify you that the connection was successful.

Minute Reminder: When this setting is enabled, you will hear a short beep every

minute while a call is in progress. You will hear the ﬁrst beep after 50 seconds, then

1 minute 50 seconds, etc.

Send My Caller ID: This function allows you to prevent others from seeing your

phone number when making outbound calls.

Off: The call recipient will not see your phone number.

On: The call recipient will see your phone number.

Set by Network: The network chooses whether to show/hide your

phone number.

Auto Redial: Sets the phone to repeatedly redial, in the event of a busy signal, until

it successfully makes a connection.

47Settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ZTE Z-431 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info