Bedienungsanleitung ZTE Z-669 (Seite 57 von 67) (Englisch)

596108

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

110

111

Problem Possible causes Possible solution

Battery not

charging

The battery or battery charger is

damaged.

Contact the dealer.

The phone’s temperature is below 0°C

or higher than 45°C.

Adjust the environment to avoid

extremes of temperature.

Poor contact between the battery

and charger.

Check all connectors to make

sure all connections have been

properly made.

Shortened

standby time

The standby time is related to your

service provider system conguration.

The same phone used with different

service providers’ systems will not

provide exactly the same length of

standby time.

If you are located in an area

where signaling is weak,

temporarily power off the phone.

The battery is depleted. In high

temperature environments, battery life

will be shortened.

Use a new battery.

If you are not able to connect to the

network, the phone will continue

to send out signals as it attempts

to locate a base station. Doing so

consumes battery power and will

consequently shorten standby time.

Change your location to one

where the network is accessible,

or temporarily turn off your

phone.

Cannot power

your phone on

Battery power has been depleted. Recharge the phone’s battery.

SIM card error The SIM card has malfunctioned or is

damaged.

Take the SIM card to your service

provider for testing.

SIM card inserted improperly. Insert the SIM card properly.

Debris on the SIM card contacts. Use a soft, dry cloth to clean the

SIM card contacts.

Problem Possible causes Possible solution

Unable to

connect to the

network

The SIM card is invalid. Contact your service provider.

You are not within the network’s

service area.

Check the service area with

your service provider.

Poor signal. Move to an open space, or if

you are inside a building, move

closer to a window.

Cannot answer

incoming calls

You have activated the Call Barring

feature.

Go to > Menu key > Settings

> Call Barring Settings, and

then select Deactivate All.

Cannot make

outgoing calls

You have activated the Call Barring

feature.

Go to > Menu key > Settings

> Call Barring Settings, and

then select Deactivate All.

You have activated Fixed Dialing

Numbers.

Go to > Menu key > Settings

> Fixed Dialing Numbers and

disable it.

PIN code

blocked

You have entered an incorrect PIN

code three consecutive times.

Contact your service provider.

If the service provider provides

the SIM card’s PUK code, use

the PUK code to unlock the SIM

card.

Unable to enter

information into

the phonebook

The phonebook’s memory is already

full.

Delete unnecessary data from

the contacts.

Phone crashes,

reboots, freezes,

or cannot be

powered on

Some third-party software is not

compatible with your phone.

Reset the phone to factory

status.

Enter safety mode and uninstall

the software that may cause the

problem.

Upgrade the phone software.

TROUBLESHOOTING

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ZTE Z-669 Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info