Bedienungsanleitung Zvox SB500 Soundbar (Seite 3 von 7) (Englisch)

792487

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

1. Speaker Placement

You can place the soundbar on any at, stable surface near your TV.

There are three general placement options, illustrated above:

Face Front You can place the soundbar on a at surface so it faces forward. This

placement is ideal for a shelf below, above or near the television.

Face Up You can place the soundbar facing up—often in front of the television. The

bottom of the soundbar should face the listening area. Check to ensure

the soundbar does not block the television infrared remote sensor. There

should be no shelf or at surface immediately above the soundbar in this

conguration.

Wall Mount The soundbar has two sturdy keyhole-shaped hanger mounts on the back

panel. You can hang the soundbar on two screwheads that are securely

installed in a wall or other vertical surface.

• If you have a powered subwoofer you wish to use with this soundbar, the subwoofer

connection guide is located on the last panel of this document.

• Consider the nish of the surface that will support the soundbar. It is the soundbar owner's

responsibility to insure that a surface nish that contacts the soundbar is protected,

should this be a concern of the soundbar owner. The contact area on the soundbar is

made of inert synthetic materials that typically do not react with furniture or wall nishes. But

any wall or surface nish can be altered by having any heavy object resting on it for a long

period of time. Place an appropriate barrier between any surface and the soundbar if you

are concerned about the nish of the supporting surface.

• A safe, secure installation is the soundbar owner’s responsibility.

• Use an unswitched AC outlet to provide power to the soundbar. With the soundbar's Auto

Standby feature turned on, the soundbar enters its low-power draw standby state after 20 to

30 minutes of inactivity. A soundbar uses less than 0.5 watt in Standby. Using a switched AC

outlet to cut off AC power to a soundbar system is not recommended. It delays subsequent

turn-on.

• Do not place any objects on top of a soundbar.

2. Connect Your TV's Audio Output to the Soundbar

All current TVs have an audio output. It is likely that one of the cables provided with the

soundbar can be used to connect the TV audio output to an input on the soundbar. DO NOT

disconnect any video program source connected to your TV (like a cable or satellite set top box,

DVD/Bluray or similar).

Connect the

Soundbar

to your TV.

Learn the

features of the

Soundbar.

“Teach” the

Soundbar your

preferred remote.

Place or

hang the

Soundbar.

Face UpFace Front Wall Mount

Optical Digital Audio Output Jack (see above image)

Most HDTVs have an optical digital audio output jack. Use the provided optical cable to connect

the TV’s output jack to optical input 1 on the soundbar.

Simple Setup – Just Four Steps

DIGITAL

AUDIO

OUT

HDMI 1 HDMI 2

VIDEO

Optical Digital

Audio Input

Optical

Output

Optical Cable

Soundbar

Input

Panel

4b. End Panel Controls on the Soundbar

On the viewer’s right end of the soundbar are four buttons.

A) POWER button:

This button turns the soundbar “ON” if it is in Standby. If this button is pressed briey while the

soundbar is “ON”, it will mute and unmute the soundbar. To turn off the soundbar, press and

hold down this button for about ve seconds.

B) Volume Up/Down rocker button

Adjusts volume up and down. Pressing either side of this button will “unmute” the speaker if it is

muted.

C) Input button:

A brief press and release of the INPUT button selects the next input in sequence.

5. Tonal Prole Setting

The soundbar has three selectable tonal proles that allow it to better match the acoustics of its

room position. Use the soundbar's PS menu feature to choose one of these three settings.

Face Front ........ PS16 - on a at surface, facing front.

Face Up ............ PS17 - on a at surface, facing up.

Wall Mount ....... PS18 - on a vertical surface, facing into the room.

The default setting for the soundbar is Face Front.

If your soundbar’s position is Face Up or Wall Mount, you should select PS17 or PS18 from the

PS menu.

PS Menu: You adjust the PS Menu setting by rst pressing down on two buttons on the end

panel of the soundbar: Power ( ) and Volume Up (+). After about ve to seven seconds you

should see PS start ashing on the soundbar's display. The rst time you bring up the PS menu,

it should show “PS 0”.

Once you see the PS display, release the buttons. Then press and release the Volume Up button

to increase the PS number. Continue pressing and releasing the Volume Up button until you

reach the setting you want: PS16, PS17 or PS18.

If your home TV system does not match the descriptions in this

guide, don’t hesitate to send an inquiry to info@zvoxaudio.com

or call ZVOX Audio at (866) 367-9869. Please provide your TV

brand and model number. A ZVOX Audio representative should be

available (Eastern Time Zone) 9:30 AM to 7:30 PM Monday through

Friday and 10:30 AM to 5:30 PM on Saturday.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zvox SB500 Soundbar Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zvox SB500 Soundbar

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info