792483
2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
Coaxial Digital Output
A few TVs, set top boxes and DVD/Blu-ray players have a coaxial digital audio output. You
can connect this output to the coaxial input on the SoundBase using a cable with an RCA
plug at each end.
Program Sources with an Analog Audio Output
If you don’t have a digital audio output option on your TV, you could connect the TV set’s
analog audio output to one of the two analog audio inputs on the the Soundbase. The analog
audio output on your TV will be a stereo minijack or a pair of RCA jacks. The two illustrations
below show the appearance of these two connections.
You could also connect the headphone output of a smartphone (or any music player) to one
of the two analog audio inputs on the SoundBase.
1. Speaker placement
You can place the SoundBase on any at, stable surface near your TV. If the TV base is small
enough, you can place the SoundBase system on a piece of furniture and then place the TV
on top of the SoundBase.
Consider the nish of the surface that will support the SoundBase. It is the SoundBase
owner’s responsibility to insure the supporting surface’s nish is unaffected by
supporting a SoundBase and a TV that may be on top of the SoundBase. Place a
barrier between the supporting surface and the feet of the SoundBase if you wish to insure
the surface nish is unaffected by supporting the SoundBase.
A thick surface nish, a newly-nished or renished surface or hand-applied surface nish
may deform or react at the contact points of any heavy object resting on the surface. The
four support pads on the bottom of the SoundBase are a soft, inert synthetic material that
does not react with typical, cured furniture nishes. But some furniture nishes can be
deformed or altered when supporting any heavy object for a long period of time. ZVOX
Audio, Inc cannot be held responsible for any change in the appearance or integrity of any
supporting surface nish that occurs after a SoundBase is placed upon the surface.
A safe installation is the SoundBase owner’s responsibility.
Use an unswitched AC outlet to provide power to a SoundBase. With Auto Standby
engaged, a SoundBase will enter its Standby state less than 30 minutes after it stops
receiving an audio signal. Using a switched AC outlet to cut and restore AC power to a
SoundBase results in a delay before sound is heard from the SoundBase.
A TV heavier than 70 lbs (32 kg) should not be placed directly on top of a SoundBase 450
or 440.
A TV heavier than 50 lbs (23 kg) should not be placed directly on top of a SoundBase 350.
A at panel TV has a high center of gravity. Please conrm the furnishing supporting
your TV and the SoundBase is stable and secure. The surface supporting the
SoundBase/TV combination should not move in any direction.
All TV manufacturers recommend that a at panel TV be anchored to a secure vertical
surface with a tether. This prevents a household accident from causing a TV to fall off its
supporting surface. ZVOX Audio recommends you heed this recommendation and all other
installation recommendations made by the TV manufacturer.
2. Connecting your TV to the SoundBase
Almost all HDTVs have an audio output, which you can connect to your SoundBase. You
should not disconnect or change any video program source connected to your TV.
15. Grounding or Polarization–This product may be
equipped with a polarized alternating-current line
plug (a plug having one blade wider than the other).
This plug will t into the power outlet only one way.
This is a safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the
plug should still fail to t, contact your electrician to
replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
Alternate Warnings–This product is equipped with
a three-wire grounding-type plug, a plug having a
third (grounding) pin. This plug will only t into a
grounding-type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet,
contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the
grounding-type plug.
16. Ventilation–Slots and openings in the cabinet
are provided for ventilation and to ensure reliable
operation of the product and to protect it from
overheating, and these openings must not be
blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug,
or other similar surface. This product should not be
placed in a built-in installation such as a bookcase
or rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
17. The MAINS plug or an appliance coupler is used as the
disconnect device, the disconnect device shall remain
readily operable.
18. CLASS II apparatus with double insulation, and no
protective earth provided.
19. CAUTION: Danger of explosion if the remote control
battery is incorrectly replaced. Replace only with the
same or equivalent type.
20. WARNING: The remote control battery (battery or
batteries or battery pack) shall not be exposed to
excessive heat such as sunshine, re or the like.
21. No naked ame sources, such as lighted candles,
should be placed on the apparatus.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not t into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specied by
the manufacturer.
12. Use only with the cart, stand, tripod,
bracket, or table specied by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualied service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
Important Safety Instructions
READ THIS FIRST
Important Safety Instructions For ZVOX System
CAUTION
RISK OF ELECTRICAL
SHOCK, DO NOT OPEN
Warning: To reduce
the risk of electrical
shock, do not remove
cover (or back) – no
serviceable parts
inside. Refer servicing
to qualied service
personnel.
This lightning ash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage” within
the product’s enclosure that may be of
sufcient magnitude to constitute a risk
of electrical shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
TO PREVENT FIRE OR
SHOCK HAZARD, DO
NOT EXPOSE THIS
APPLIANCE TO RAIN
OR MOISTURE.
THIS APPLIANCE SHALL
NOT BE EXPOSED
TO DRIPPING OR
SPLASHING WATER
AND NO OBJECT
FILLED WITH LIQUIDS
SUCH AS VASES
SHALL BE PLACED
ON APPARATUS.
WARNING
3. Connect the AC cord
After making the signal connection, connect the AC power cord to the back of the speaker.
Then connect the AC power cord to an AC power receptacle. Turn on the speaker using the
power switch on the back panel next to the AC cord.
If your home TV system does not conform to the descriptions in this
guide, don’t hesitate to send an inquiry to info@zvoxaudio.com or
call ZVOX Audio at (866) 367-9869. Please provide your TV brand
and model number. A ZVOX Audio representative should be available
(Eastern Time Zone) Monday through Friday 9:30 AM to 7:30 PM.
You can connect a minijack analog audio output to Analog Input 2.
OR
You can connect an RCA jack analog audio output to Analog Input 2.
AC cord connection to SoundBase back panel.
TV Optical Output ZVOX Optical Input
Optical Cable
Optical Digital Output
Almost all HDTVs use an optical digital audio output, which you connect to the Soundbase’s
optical input using an optical cable.
Stable Placement. Do not place the ZVOX
system on an unstable surface. The ZVOX
system may fall, causing serious injury to a
person and damage to the product. Do not
operate the ZVOX system on an unstable surface.
Placement of a TV on the ZVOX system. A television that
weighs less than the cited limits and has a base smaller
than both size limits (shown below) can be placed on top of
a ZVOX system—BUT ONLY IF THESE SAFETY
PRECAUTIONS ARE STRICTLY OBSERVED.
The TV must be anchored to the rear wall using
anchor bolts and supporting cables according to
the recommended guidelines provided by the TV
manufacturer. Household accidents and other
unforeseen events are may occur. ZVOX Audio
Special Safety Warnings Regarding Placement of
ZVOX System and Other Equipment
provides no guarantee that any object placed on top
of a ZVOX Audio product is safe and stable. It is the
sole responsibility of the ZVOX owner to check that
any object placed on the top of the ZVOX system is
stable at the time of installation and at frequent
intervals afterward.
SoundBase 450/440: TV weight-70 lbs (32 kg) or less.
The base of the TV must measure less than:
Width Depth
26 in (660 mm) 13.5 in (343 mm)
SoundBase 350/330: TV weight-50 lbs (23 kg) or less.
The base of the TV must measure less than:
Width Depth
22 in (558 mm) 10.5 in (267 mm)
• Prevent the ZVOX system from changing position
after installation.
Setup and Remote Learning
1
2
3
4
Connect the
SoundBase
to your TV
and/or audio
devices.
Learn the
features and
controls of the
ZVOX system.
“Teach” the SoundBase
to respond to your
preferred remote
control’s commands
(Volume/Mute/Power).
Place the
SoundBase.
Input 2
Input 2
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Zvox SoundBase 330 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info